Ok,When you power up the game what does it say on the screen? I know i should read the previous posts but lets start over for the moment
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Ok,When you power up the game what does it say on the screen? I know i should read the previous posts but lets start over for the moment
Quoted from alexanr1:Says the normal:
TESTING
50020. REV L-4
Screen then goes into normal modes. Shows high scores etc...
Ok when you start a game and start playing does it play normal then start doing odd things?
Quoted from alexanr1:The flippers were flipping on their own during a game
Check the flipper boards the right and left disconnect and reseat them and clean the optos
Quoted from alexanr1:the speech acting up.
Reseat the sound roms and while your at it reseat the game rom... Since you replaced the ribbon cables go over them again to make sure you didnt miss any pins or row of pins.
Quoted from alexanr1:The door controls don’t work. (Most of the time). It’s like it’s all confuse
Any signs of battery corrosion on the CPU board?The first thing the corrosion attacks is the menu buttons
Quoted from Coyote:Okay, then. Did you get NEW ribbon cables? (I don't remember if I read that in this thread or another.) I make my own, but many folks don't wanna deal with that.
The next step would be to disconnect (with the power off!) the Fliptronics board. Pull the ribbon cable from it. Turn game on. Does it still act up? If so,
Plug the Fliptronics board back up, and disconnect the sound board. Turn game on. Does it still act up? (Ignore the Sound Error. That's expectd since we disconnected the board.)
If you have not gotten NEW ribbon cables, order some.
Yes he stated that he bought brand new cable ribbons
Quoted from Coyote:Okay, thanks, missed that! D'oh.
No problem i missed at first also..Haha
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-odd-behavior-?tu=pinmike and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.