Quoted from Smart_Bomb:according to the schematic i should have 20 volts ac going to the red wires at j107
This is DC voltage not AC voltage. If you checked this with your DMM set to AC it would have given you a zero reading. Recheck on DC.
You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Quoted from Smart_Bomb:according to the schematic i should have 20 volts ac going to the red wires at j107
This is DC voltage not AC voltage. If you checked this with your DMM set to AC it would have given you a zero reading. Recheck on DC.
You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-no-voltage-to-flashers?tu=grumpy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.