Twilight Zone
Bally, 1993I used to have a perfectly working Twilight Zone. Now it appears suddenly at once my clock motor stopped working (I'm not sure the motor is dead), and both Eddy sensors are no longer working. Everything else works great. I've double checked connections, and fuses seem to be good. Does anyone have any suggestions as to what or how I should try and troubleshoot this? Thanks in advance 
12v power may be cut. Check the plug going into the motor driver board, under the clock. Make sure you get a reading there. (Read on the input side, not the motor connection (output) side. Likely somewhere in the line the 12v is cut, or loose in a connector.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-experts-clock-and-eddy-issues and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Ormond Beach, FL