Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider wrd1972.
Click here to go back to viewing the entire thread.
Okay I have a customer who has a TW that has some very garbled areas ONLY on the right half of the DMD, but I am not sure if its the DMD display or the DMD board. The current display is an aftermarket LED color dot-matrix...not sure of the brand. The pin is not currently in my possession, so I can't really test anything. Oh and the multiple ribbon connections were removed and reconnected just to rule that out.
Any ideas on how to determine whether its the DMD board or DMD display?
Quoted from LTG:From CPU to DMD driver board to DMD ? If so, that doesn't rule out a bad ribbon cable.
LTG : )
Here is a video:
https://www.dropbox.com/s/wv32k2p1re08vdn/IMGA02391001-1.mp4?dl=0
Yes checked the cables you mentioned to make sure there were not some very intermittant opens. Yes could try replacing the cables first.
You're currently viewing posts by Pinsider wrd1972.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-dmd-garbled-board-or-display?tu=wrd1972 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Richmond, KY
Toronto, ON