Sorry everyone its been awhile the Holidays got a little crazy and now I've been back at it. So I replaced U20 and U14 and socketed checked with a DMM everything looks good. However still had the same issue so I decided to order a new board and same issue.
Quoted from zaza:You can test the inputs quite simple of the 7-optoboard.
-Again in switchtest T.1
-Keep J3 connected and unplug J2 on 7-optoboard.
-with a wire from J2-9, touch the other pins on J2 (see picture). Does this trigger any switch ?
[quoted image]
Just tried this and it doesn't trigger any switch. Same issue with new 7-optoboard both have LED lit so I know they are getting power. So my thought is could it be related to however J1 interacts with the opto board? Seems weird to me that when I jumper J3 on the opto it works(shows up in test mode) but when I jumper J2 it doesn't.
Side note I think I have prototype 1 which to me is pretty cool.