Hello!
I'm going through a deep cleaning with my recently acquired TZ and when I powered it back up, F112 was blowing. I made sure all the ribbon cables were seated correctly and pulled J105 from the driver board. Fuse no longer blew but of course didn't fix anything. One thing I did notice was when I first started the game, the flippers would all pulse and stay up until the F112 failed. Then they would work fine in test mode. I then plugged back in J105 and unplugged J907 and the fuse was fine (but of course nothing else was working).
Any help appreciated with this one as I am quickly running of beer trying to figure this one out.
Thanks!
Shane