I'm new to the forums, and this is my first pinball machine. I'm having difficulties with a clock target mod I purchased through eBay
It has a pass through connector that plugs between an existing pair of plugs in the machine, which I circled in the picture from the installation instructions. The machine I purchased works 100%, but the wiring was completely redone from scratch, and the plugs don't match the original. This machine doesn't even have any wiring going through the hole in the bottom right under the playfield like in the instructions. I was wondering if anybody here has the same mod and can confirm where the plug connectors lead to, so I could follow the wires and make a custom harness if I have to. I asked the seller where they lead to, but was only able to get pictures.
Any help is greatly appreciated!