Hey Richard!
I recently installed the 3rd magnet into my game, however I had enormous help from another pinsider, dmacy, who was swapping my playfield for one with the 3rd magnet core hole pre-drilled.
I tried documenting the process as thoroughly as I could in the club thread. It’s not technically difficult, but it’s a demanding job that requires a fair bit of effort.
Here is my parts list:
https://pinside.com/pinball/forum/topic/twilight-zone-owners-club/page/237#post-6784377
Here’s a few posts showing the installation process. I did not use a kit.
https://pinside.com/pinball/forum/topic/twilight-zone-owners-club/page/237#post-6776841
This isn’t a weekend project, and basically requires a near full tear down of the upper playfield, especially if you’re going to have to drill a hole into your playfield for the magnet. Here’s a link to that instruction:
http://iobium.com/drilling_template.htm
Final link for posterity (ignore the security concern. The site is safe)
https://gameroom.flipperwinkel.nl/games/dmdgames/tz/3rdmag/index_e.htm
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/twilight-zone-3rd-magnet-how-to-add-it and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.