Nothing is connected to J120 on my newly acquired Twilight Zone. I've searched high and low for the connector even to the point of removing boards just in case it was behind one of the. I'm beginning to think that perhaps the female connector fell off and the wires were pulled back into one of the bundles of wires from the cabinet to the head.

Can another friendly TW owner please take a photo of J120? Also would be helpful if you can tell me what bundle the wires that feed J120 go into. On my machine there are two bundles of wires fed into either left or right plastic conduit connecting the head to the body of the machine.

Thanks in advance!

Allen

Thank you very much!!! I removed the door of the machine that illuminates the translite. There is my missing connector! Duhhhhh!