target tower does light up on the dmd skill shot before plunge

I had a switch 60 error on the std code, now updated code its gone

If this happens again, Check well walkers hand is not caught behind the crossbow/fish tank sign, I had to adjust the metal bracket, be very careful the bracket is part of the plastic ramp

Be careful not to stress the plastic, used 2 hand held pliers, combination pliers to hold the vertical bracket & long nose pliers to tweek the top up

in the manual, no switch 60 listed, you still running box code ?

Once you go the update code 1.11 that error will go, the update is waiting

on the switch matrix grid shows #60 as nothing & no switch #60 on the PF pic

Think the LE's came with updated code Version compared to a pro, my pro had that error #60 tried to look into it with no luck, updated code & it was gone, someone else may have more info or wait for the next update

Has been some discussion about the Tower target plunge shot/skill shot, this target can be pretty hard to hit on the plunge, Maybe is meant to be this way
Looks like the target could be moved across very slightly, Had a look under the PF not much adjustment there unless you open up the mounting holes a bit, have a look at your target position & post up what you see

IMG_0654.JPG