Quoted from ezeltmann:thanks .. but this is not working .. anybody ever experience this before?
i have tried multiple times and there is no display at all when i boot up with 8 turned on ..
if i turn 8 to on while the machine is on and press reboot through the update menu , the machine locks up .. if i press the white button on the board <as suggested by stern in the mustang manual i found> the machine locks up.
Seems like i need a new board. fist time trying an update on this machine .. i have others , so i do have experience.
thanks in advance for any help.
I had the same issue with my Metallica, it wound up being the Eprom( spider looking thing) having 2 off the legs not seated in.... Just pull it out and make sure all the legs are seated properly when u put it back in