Tulsa, OK
Here's the prison roof I made and here's a link to the .stl for those of you with 3d printers.
https://drive.google.com/file/d/0Bxmp5P5A-1lAdG9OUzRLcmNvWFE/view?usp=sharing
(Topic ID: 106132)
Linked Games
The Walking Dead (LE)
Stern, 2014-
The Walking Dead (Premium)
Stern, 2014
-
The Walking Dead (Pro)
Stern, 2014
Topic Gallery
You're currently viewing posts by Pinsider Tres.
Click here to go back to viewing the entire thread.
1 month later
7 months later
Installed a Pinduino and a set of addressable LEDs in my Walking Dead over the weekend. One string of LEDs is installed on the left ramp and another string is installed on the right side of the apron. Each string is controlled separately by a single Pinduino.
Most of the lighting effects happen on the apron while the ramp LEDs light the playfield. The coolest effect happens at 6 min 20 sec in the video during the crossbow shot where Eric helped write a "bullet" sequence into the effects. Really neat!!
With Pinduino you can easily customize any of the effects based on J6 or J7 triggers.
Here are some examples of the effects in the current sketch:
Apron flashes blue when the prison is hit.
Apron flashes green when the well walker is hit.
All LEDs flash red when the pops are hit.
Apron flashes green when the Woodbury spinner is lit.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider Tres.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
