Quoted from GRB1959:

1. Download Cleland's BIN file here:
https://pinside.com/pinball/forum/topic/the-walking-dead-code-update-160/page/4#post-4107914
2. Place the BIN file on a freshly formatted thumbdrive - basically exactly what you would do for a ColorDMD ROM file upgrade.
3. Turn game off, move dip switch 8 to the left, turn game on and follow the instructions.
No need to turn the game off. Set dip switch 8 to left, hit the enter diagnostic button, the screen tells you to plug in the USB stick, do so. Then hit enter to update. - LTG : )™
4. Wait a good 20 minutes for the game to erase the current memory and install the new BIN file. Follow the prompts on the screen to return the game to normal mode once the code update is complete.

Quoted from GRB1959:

More
When you download the BIN file to your hard drive (there is only one file as shown by the photo below) you need to copy that one BIN file to a USB drive. I am not sure why you are trying to extract the BIN file.
I just successfully downloaded the R rated BIN file to my hard drive and copied it to a USB drive without any problems as a test.
Gord

Quoted from RipleYYY:

not sure if Lyman is here... but most surely you are... than hi from Belgium (and his nice EPC)
from my player POF, this game is already a masterpiece, i bought it mainly due to your code
but please, if you have just the time to add a small ball saver timer after the prison magnet, it would be very nice, as TWD is already a very hard game to play/master... and having the ball going perfectly SDTM is a real pain (in the a**), even more when pin is set-up with a very sensitive tilt
i know this has already been request, than tanx in advance