My auto plunger is being finnicky on my TSPP. It will randomly autofire after I have manually plunged a ball, and auto plunges seem to take forever during multiball. Anyone ever run into this? I haven't taken a look at the shooter lane switch yet.

Anyone's couch ball release coil ever buzz a bit?

I have replaced the coil and sleeve.

Also I swear this game gets weak flippers during long games like lotr but maybe that's my mind messing with me.

Pretzel MB is like 20+ left orbit shots.

Anyone got a clean comic book guy figure that they'd sell? The plastic on mine is pretty stained.

I have a mezel mods alien mod for sale. Goes for 70 bucks on their site - I will sell for 40 + the actual shipping cost to the buyer. If anyone is interested please PM me.

http://mezelmods.com/collections/simpsons-pinball-party/products/tspp-aliens

Looking for a homer head if anyone has one for a decent price...

I would lightly tap that out from underneath by holding the handle of a socket against the post and lighting hitting the end with a hammer. Should pop right up. Good luck!

I'm still in the market for a homer head if anyone has a nice one.

Im getting ready to do a playfield swap on my simpsons. Anyone ever do one and document it with pictures? Looking for all the resources i can get for when i inevitably get stuck.

Just finished a playfield swap to one that was done by HEP.

IMG_2102 (resized).JPG

No problem. I tapped the old guides out from the backside of the game. My ghetto trick for not having to pre drill a new playfield is to take a fine Phillips head screw driver and work the dimple a bit. Tapping in the guides is easier with a second set of hands if you can get someone to hold them in place. In my experience you can see how far they're supposed to be tapped in because the metal is a slight different shade.

I did a fish tales playfield swap recently and tspp was much easier overall.

I'm having a small but annoying problem on my game and figured I'd appeal to the club for help / advice.

On my game, when the ball is rolling along the left flipper wire guide the ball takes a little hop right at the moment where it's about to transition to the flipper. Its causing the ball to not ride the flipper at all.

Has anyone run into this? I recently did a playfield swap. The wire guide looks to be tapped into the playfield all the way and the flipper is properly aligned. The game is level.

Maybe the guide got bent somehow?

Interesting! They are titan bands, but not the thin ones. I will try swapping out the rubber. Good idea, thanks!

Anyone try a pinsound board in a tspp?

I wish someone would do a pinsound mix for this game and incorporate more female voices.

Anyone in the club install a pinsound board in their game? Would love thoughts on the 1 tspp sound package. Is it an exact match of the original sound package?

No one has put a pinsound board in one of these yet?

I’m looking for either a set of ramp flaps for the treehouse and moes ramps or maybe even full replacements.

Are these unobtanium now?

I have the protectors installed. Cliffy makes ramp flaps too?