Is this the fix you are referring to: https://pinside.com/pinball/forum/topic/tspp-speaker-humbuzz-fixed

Because my TSPP is humming badly! Or if you have some other info please let me know.

Great!! I actually just did it. Just took two 4.7 kOhm resistors and soldered directly over (parallel) the existing R106 and R110 resistors. Quick and dirty. It doesn't let me adjust anything, but it improved the speaker noise quite a bit. Awesome...

Now if only i could get rid of my transformes noise in the machine as well. Seems that is a lot harder as i already tried the "bash it wit a hammer"-approach, tightening it to the cabinet and tightening the bolts that goes thru the transformer it self. But still no luck

Any tips about this? Links or images from others that have done it? Or do I just insert small rubber rings between the bottom of the bracket and the cabinet?

Hi there

Its probably too expensive to ship to Denmark, but i actually need the green modes plastic from the back of the machine plus the right slingshot plastic. Would you happen to have them?

Best regards

Michael

It is going to look sweet! Looking forward to seeing the final result.

My machine have LED's in the GI, and they are flickering terribly. It came with the LEDs, so i dont know the make or quality of them. But i believe i read somwhere that the early Stern machines are very prone to LED flickering in the GI. So that could be something to watch out for. Perhaps others have some experience with GI LEDs?

Mine sometimes needs a second or third try, but mostly gets it right the first time.

But i would be interested in a solution as well?