Can you install a shaker motor on a TSPP?

Thank you. I thought someone said there was a way to wire it in so it would still interact with the game and make sense. Is this way not possible either or just not recommended?

Has anyone tried Pinsound board inside of the TSPP. I just ordered one. Also ordered Flipper Fidelity upgraded speaker kit with the 10 inch sub. Any feedback on the sound improvements this will make to the game. Also they said pinsound board in the near future would have the capabilities to incorporate a Shaker motor support to the game. Any thoughts?

Back in the club. Working on this beauty. Will post pics when completed.

Bought a stock home use only 2 weeks ago and she is going through some changes.

20171230_232509 (resized).jpg

Just added the Pinstadiums to my TSPP. I put in the Coin Taker Premium Non ghosting LED Kit first. Looked great but it was still a tad dark in some areas. I mostly added it for the interactive UV Flashers that go off with the factory flashers. Makes the game so much more interactive. Lots more upgrades to put in. Just wanted to share my experience with Pinstadiums in this game.

Need to fine tune the brightness and color setting but I just wanted to show you guys a few options.

20180101_220104 (resized).jpg

20180101_222203 (resized).jpg

Thank you.

Great score I got to 104 million yesterday. Alien invasion is awesome... Great game!!!

I usually only get those scores when I'm waxing the playfield.

Great score

The coin taker premium non ghosting kit is wayyyyyy better. Trust me I have done them both and I only use Coin Taker from now on. I have done so many of coin takers sets and they are by far brighter and overall much better quality. Lots of stuff I bought from comet does not work properly. Spent so much money in specialty bulbs and very disappointed. Just tried them again last week and still bad results. there super bright leds are not bright at all very expensive and poor quality.

Order Cointakers set if doing TSPP but order a few extra white flasher bulbs I think for flashers they should be white and let the plastic change the color. Makes it brighter and more vibrant.

This is just my opinion. I'm sure there are plenty of happy customers from comet. (I'm just not one of them)

Never want to bash anyone that is why I stated there are alot of happy comet customers. I myself just had some quality issues. I could of had bad luck every time I ordered. Who knows? My kit that I posted pictures of is from Coin Taker. And I'm very pleased.

All is good in the world of pinball.

Before and After for my TSPP.

20180106_124234 (resized).jpg

20171214_194109 (resized).jpg

Simpson's TV Mod is absolutely amazing!!! Probably the best pinball mod ever made!
Tree house and TV Mod from Sparky are an absolute must for this game.

Sparky

Link to sparky website:
http://www.sparkypinball.com

Both
Wedge is all of the inserts.50+
Bayonet for all gi. 40+
Flashers are wedge as well.
It takes a lot of bulbs. It's always better to buy more then not have enough.

Settings. All depending on the difficulty setting in the menus. My first TSPP I had did not carry over so it was alot tougher. When I bought my current TSPP the setting was already on and I had the same question. I left the feature on. I get way more couch multiballs now.

You're under arrest!
For whaat?
Hoarding Pinballs!

Ok it's looks good but clean your house.

Prismatic Powders
Color Code Yes Yellow

20180121_225754 (resized).jpg
20180110_232752 (resized).jpg
20180110_232718 (resized).jpg
20180110_232637 (resized).jpg

Thanks brother. If cleaning was the only thing we had to do life would be alot less stressful. I like the color combo of pink and blue.

Not a fan of the green so much.

Simpson's is a great game it deserves the powder treatment.

As of today I'm back out of the club. Sold my beautiful Simpson's pinball party to a great guy in California. Last time I sold my Simpson's it bothered me so much 4 months later I bought another one. I absolutely love this game unfortunately I need the space 3 out for 3 in. Somehow I have a feeling I will be back in the club "again" in the near future. Good part of selling a game is the new people you meet. This guy has been collecting for years. I will let him announce his new purchase himself after he receives his new game.
Very happy the game is going to a great home.
Congrats on your purchase.

Sorry for the delayed response. Been crazy lately. No custom sounds all original however the pinsound allows me to fine tune the audio bass/ treble and power gain for back box and for subwoofer independently. Also I have the upgraded 10inch Subwoofer so it is nice to have a higher powered amplifier. Pinsound allso let's you customize your sound files. However I have not taken advantage of this feature also future updates will allow integration of a shaker motor.
They are expensive but my opinion well worth it on older titles.

Yes I do have the tendency to upgrade all of my games. Not about the money to me. Love the hobby and the sport. And yes sometimes I do lose money after I have upgraded my game and choose to sell it. However at least I know when one of my games are sold someone is getting the best version of the game without cost restrictions from the factory. Of course that is only my opinion.

Your 500.00 will magically disappear.

Joking aside it greatly improved the sound quality of older games. Extra power and added controls for treble and bass for both back box speakers as well as the sub. Customization of speech and sound files can also be achieved with this board. Future technology updates promises shaker motor support. It's a must if you want better sound.
Hope this helps.