Photo: robin
  1. » Forum
  2. » All Pinball
  3. » All clubs (...members only!)
  4. » The Simpsons Pinball Party (TSPP) Owners Club..... Members Only!!!
(Topic ID: 50801)

The Simpsons Pinball Party (TSPP) Owners Club..... Members Only!!!

By kwiKimart

10 years ago


Topic Heartbeat

Topic Stats

  • 7,278 posts
  • 709 Pinsiders participating
  • Latest reply 43 hours ago by allsportdvd
  • Topic is favorited by 329 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

IMG_7854 (resized).jpeg
63C0A1C8-924E-4AA5-8A66-A3C65298F62E (resized).jpeg
Screenshot 2024-04-03 at 10.11.55 AM (resized).png
CD446378-C181-45FD-8BB1-987240C63FC1 (resized).jpeg
IMG_0390 Copy (resized).jpeg
IMG_0391 Copy (resized).jpeg
IMG_0393 Copy (resized).jpeg
IMG_0399 (resized).jpeg
IMG_5056 (resized).jpeg
IMG_6529 (resized).jpeg
IMG_6498 (resized).jpeg
IMG_6490 (resized).jpeg
IMG_6491 (resized).jpeg
IMG_6488 (resized).jpeg
IMG_6489 (resized).jpeg
IMG_20240129_174034 (resized).jpg
1 ... 134135136137138139140141... 146
There are 7,278 posts in this topic. You are on page 137 of 146.
0
0
0
#6801 1 year ago
 
???

El_Barto

Pinside apprentice

US Springfield, OR

4y 12,650 19

Quoted from Johnbeatle:

Ok not sure what I'm looking at. I've done some simple modding and led swapping but not much work with wiring. I looked up y switch for simpsons on Marco and I'm not seeing what I expected. I see this little guy next to the eject assembly. Is that what you're talking about?[quoted image]

That switch died on my TSPP, I don't think I had to pull the whole coil assembly to swap it out. The wiring was kinda tight on mine making it more difficult to resolder the wires, so while I had it apart I extended the wiring so I could get better access to the switch for future replacements.

0
0
0
#6802 1 year ago
 
???

mezzin

Inactive member

Unknown

17y 28,400 9 1 7

Quoted from Johnbeatle:

Ok not sure what I'm looking at. I've done some simple modding and led swapping but not much work with wiring. I looked up y switch for simpsons on Marco and I'm not seeing what I expected. I see this little guy next to the eject assembly. Is that what you're talking about?[quoted image]

Mine was fixed after some cleaning (pushing the switch manually a few times and now it works great again) it just might be a bit of dirt.

Just installed the LEDOCD Damm it was expensive to get it shipped but what a difference it just look like an old school pin again. We didn't upgrade to LED but we had a older simpsons and the incandescent lights just look amazing I was missing that a bit on this pin but what a difference it make. Just default setting plug and play (after getting the proper manual) easy enough. Stick it on backbox and disconnect some cables and connect a few new ones and done.

Soon I need to cut up the simpsons play set to fit in the corner and add moe to the bar as well still thinking of to make him move a little bit. that would be so cool.

It there a very very simpel way to intercept the signals for the pinball machine gates so I can trigger my own mod to only light up when the ball travels via moes bar. (if that is not possible I just add a sensor to the system to solve it.)

0
0
0
#6803 1 year ago
 
MJF

mikespins

FlipMods

US Monroe, NY

3y 93,300 663 9 11

I have a few donut shooter rods left for sale. Order now to get them in time for Christmas

https://mikes3dthings.com/product/donut-shooter-rod/

pasted_image (resized).pngpasted_image (resized).png

0
0
0
#6804 1 year ago
 
___

brainmegaphone

Pinside member

9y 73,550 1,336

Quoted from mezzin:

Mine was fixed after some cleaning (pushing the switch manually a few times and now it works great again) it just might be a bit of dirt.

Not sure if this was mentioned - but I purchased 1 or 2 spares of these switches just to have on hand. The last time my switch acted up (and I was ready to swap it out) I tried bending it up to make it activate with less of a hit and that solved my issue. I imagine eventually I will need to replace the switch though.

0
0
0
#6805 1 year ago
 
EPB

qbass187

Game Changer Amusements

US Suffield, CT

11y 97,550 1,308 16 8 1

Does anyone know where I can track down some of the snap in playfield PF lamp housings?

3E337DBB-273D-4BCF-8B76-CC5BDC658244 (resized).jpeg3E337DBB-273D-4BCF-8B76-CC5BDC658244 (resized).jpeg
0
1
1
#6806 1 year ago
 
MJS

mjs2

Pinside member

US Chesterfield Township, NJ

11y 57,800 324 4

0
0
0
#6807 1 year ago
 
EPB

qbass187

Game Changer Amusements

US Suffield, CT

11y 97,550 1,308 16 8 1

0
1
1
#6808 1 year ago
 
MJS

mjs2

Pinside member

US Chesterfield Township, NJ

11y 57,800 324 4

Yup - just check out the couple versions they have - not sure if you need the diode version or not and they also have versions with and without the brackets.

Cheers
M

1 week later
0
0
0
#6809 1 year ago
 
BOS

McDoom

Pinside member

4y 74,050 623

I just got done installing a pinsound in my TSPP,
When I turn the game on this message continues to flash on the screen and the pinsound is prompting me to reset the game.

When I turn the game on and off the same thing happens. (Currently unable to play the game).

I’m trying to figure out if anyone had the same issue and if so how did you fix it.

Thanks

C3B66CDB-1C39-42B5-BCA9-57B65823C877 (resized).jpegC3B66CDB-1C39-42B5-BCA9-57B65823C877 (resized).jpeg
0
0
0
#6810 1 year ago
 
DIL

PinPickle

Pinside+ Frequent

3y 70,550 1,224 6

I’m a couple years removed from doing this but I believe you need to have updated sound roms. I could be wrong but I had V4 and needed V5 for it to work. Again, “I think” that was my issue

If you have v5 sound Rom’s I would just go back and redo all your connections.

0
0
0
#6811 1 year ago
 
JIM

JimB

Pinside member

11y 85,300 1,670

Do you have the new sound files copied to the usb yet? It won’t start without them I believe.

0
0
0
#6812 1 year ago
 
BOS

McDoom

Pinside member

4y 74,050 623

I downloaded the sounds from pinsoud; I assumed they were the lasted version.

Can anyone provide a link to the most current pinsound v5 update?

0
0
0
#6813 1 year ago
 
JMR

Only_Pinball

Pinside+ Frequent

9y 141K 3,617 6

Quoted from PinPickle:

I’m a couple years removed from doing this but I believe you need to have updated sound roms. I could be wrong but I had V4 and needed V5 for it to work. Again, “I think” that was my issue

If you have v5 sound Rom’s I would just go back and redo all your connections.

This is most likely the issue

0
0
0
#6814 1 year ago
 
PCB

monkfe

Pinside+ Frequent

US Toms River, NJ

5y 91,300 1,643 13 6

Quoted from McDoom:

I downloaded the sounds from pinsoud; I assumed they were the lasted version.
Can anyone provide a link to the most current pinsound v5 update?

I believe the v5 shown on the startup screen there is the machine software version ( and that is the latest version), nothing to do with the pinsound board...do you hear the board start up? Usually a chiming sound....but yes go to pinsound, find the machine, download the version you want...copy to the the usb...the machine will unzip it and install it...pretty easy really....Good luck...

0
0
0
#6815 1 year ago
 
SAD

simpswho

Pinside+ Frequent

Unknown

4y 50,550 138

Hello I was wondering if this is a problem. When the righ tflipper button is activated, I'm hearing a faint hum through the speakers ,only the right button. When machine flips the right flippers automatically there is no sound. Anyone know what could cause this Thanks

0
0
0
#6816 1 year ago
 
SUM

Sean_bc

Pinside+ Frequent

CA Surrey, BC

3y 82,050 529 4

Mine does this, I've grown accustomed to it. Like a warm fuzzy buzzy hug...

0
0
0
#6817 1 year ago
 
MJF

mikespins

FlipMods

US Monroe, NY

3y 93,300 663 9 11

Quoted from simpswho:

Hello I was wondering if this is a problem. When the righ tflipper button is activated, I'm hearing a faint hum through the speakers ,only the right button. When machine flips the right flippers automatically there is no sound. Anyone know what could cause this Thanks

Very common on this game.

0
0
0
#6818 1 year ago
 
SAD

simpswho

Pinside+ Frequent

Unknown

4y 50,550 138

I have owned the game from day one, this just started. Thank you for your responses

0
0
0
#6819 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Joe Balcer sent me his personal game to perform an ultimate shop job.

Problem is Joe started tearing the game down before it got to me.

Anyone have a link to shop out pics?

0
1
1
#6820 1 year ago
 
YAJ

RellikJM

Pinside+ Frequent

3y 38,150 135 7

Quoted from Bryan_Kelly:

Joe Balcer sent me his personal game to perform an ultimate shop job.
Problem is Joe started tearing the game down before it got to me.
Anyone have a link to shop out pics?

https://pinside.com/pinball/machine/simpsons-pinball-party/gallery/shopout

0
2
2
#6821 1 year ago
 
TEZ

allsportdvd

Pinside member

AU Brisbane

13y 101K 2,327 21 45

I'm in the middle of doing mine and found this link useful
https://wisconsinpinball.com/viewtopic.php?f=25&t=702

0
0
0
#6822 1 year ago
 
KWH

keeganhayes

Pinside member

US Los Angeles, CA

11y 28,050 27 1

Just picked one up and it's got some low quality sideblades in it.

Sillyoldelf's set looks great but doesn't look currently available.

Anyone have recs on some readily available side art?

0
0
0
#6823 1 year ago
 
MJF

mikespins

FlipMods

US Monroe, NY

3y 93,300 663 9 11

Quoted from keeganhayes:

Just picked one up and it's got some low quality sideblades in it.
Sillyoldelf's set looks great but doesn't look currently available.
Anyone have recs on some readily available side art?

These are pretty popular https://www.pingraffix.com/product-page/the-simpsons-pinball-party-pinblades-for-stern-pinball

0
0
0
#6824 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Quoted from RellikJM:

https://pinside.com/pinball/machine/simpsons-pinball-party/gallery/shopout

Quoted from RellikJM:

https://pinside.com/pinball/machine/simpsons-pinball-party/gallery/shopout

Thanks! I’m going to need them.

D4C746C9-4BA9-4827-AF25-BCB600BFC900 (resized).jpegD4C746C9-4BA9-4827-AF25-BCB600BFC900 (resized).jpegDE2BB389-04B2-40FC-893C-267F41CB0C67 (resized).jpegDE2BB389-04B2-40FC-893C-267F41CB0C67 (resized).jpeg
0
0
0
#6825 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Quoted from Bryan_Kelly:

Thanks! I’m going to need them.
[quoted image][quoted image]

Here’s where the game started. Joe sent me these pics.

4BCE3239-1408-475F-854F-9AD24899E587 (resized).jpeg4BCE3239-1408-475F-854F-9AD24899E587 (resized).jpeg5646BA80-3C46-46DA-A79F-6B18CE78F6EC (resized).jpeg5646BA80-3C46-46DA-A79F-6B18CE78F6EC (resized).jpeg83B05D90-1754-4A95-9A19-FD5838EBAD51 (resized).jpeg83B05D90-1754-4A95-9A19-FD5838EBAD51 (resized).jpegB8F190C6-CCC8-429A-BEE4-F97ACA327324 (resized).jpegB8F190C6-CCC8-429A-BEE4-F97ACA327324 (resized).jpegD0EC488F-8358-4113-97EF-508B3DE4C9E4 (resized).jpegD0EC488F-8358-4113-97EF-508B3DE4C9E4 (resized).jpeg
0
0
0
#6826 1 year ago
 
???

El_Barto

Pinside apprentice

US Springfield, OR

4y 12,650 19

Quoted from Bryan_Kelly:

Here’s where the game started. Joe sent me these pics.

What does the garage ramp look like - is there anything left of it??

0
0
0
#6827 1 year ago
 
TEZ

allsportdvd

Pinside member

AU Brisbane

13y 101K 2,327 21 45

How does a pinball designer let a game get into that state? You would they would know a bit about maintenance

0
0
0
#6828 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Quoted from allsportdvd:

How does a pinball designer let a game get into that state? You would they would know a bit about maintenance

This wasn’t Joe’s game. He bought it a while back from an op.

0
0
0
#6829 1 year ago
 
MAT

mpdpvdpin

Pinside member

US Providence, RI

6y 95,050 4,421 7 96 1

Lost power to R rear main playfield flipper…wire disconnected. Where does this attach on the flipper switch stack?

80497583-FB50-414E-8C57-F6CD7F035578 (resized).jpeg80497583-FB50-414E-8C57-F6CD7F035578 (resized).jpeg
0
0
0
#6830 1 year ago
 
EPB

qbass187

Game Changer Amusements

US Suffield, CT

11y 97,550 1,308 16 8 1

Quoted from keeganhayes:

Just picked one up and it's got some low quality sideblades in it.
Sillyoldelf's set looks great but doesn't look currently available.
Anyone have recs on some readily available side art?

I just ordered a set from Silly Old Elf.
Send them a message. There were post issues where they are but I believe they’re all set now.

0
0
0
#6831 1 year ago
 
???

vbobrusev

myPinball

RU Смоленск

7y 47,550 416 16

I have side decals if someone need it

0
1
1
#6832 1 year ago
 
???

Pizzaman13

Pinside member

US Bethesda, MD

5y 46,800 254 12

New to the group. Having a blast. Quick question, anyone upgrade the speakers? If so, worth the effort? Anything special needed to pull it off?

0
0
0
#6833 1 year ago
 
MJF

mikespins

FlipMods

US Monroe, NY

3y 93,300 663 9 11

Quoted from Pizzaman13:

New to the group. Having a blast. Quick question, anyone upgrade the speakers? If so, worth the effort? Anything special needed to pull it off?

Welcome and congrats! TSPP is awesome. Check out PinSound! The best solution available.

0
0
0
#6834 1 year ago
 
PCB

monkfe

Pinside+ Frequent

US Toms River, NJ

5y 91,300 1,643 13 6

Quoted from Pizzaman13:

New to the group. Having a blast. Quick question, anyone upgrade the speakers? If so, worth the effort? Anything special needed to pull it off?

simple enough to do....anything is better than those cheap paper cones on the originals...and I'll also second pinsound....

0
0
0
#6835 1 year ago
 
___

brainmegaphone

Pinside member

9y 73,550 1,336

Quoted from Pizzaman13:

New to the group. Having a blast. Quick question, anyone upgrade the speakers? If so, worth the effort? Anything special needed to pull it off?

Keep in mind upgraded speakers will only get you so far since the sound roms are of limited quality.

I'm also not sure if Pinsound will help with the original sounds. I thought it was only to provide custom sounds in which case if you want to play the original game as intended it may not be a worthwhile solution for you.

0
0
0
#6836 1 year ago
 
???

troon47

Pinside member

US Vancouver, WA

6y 36,650 202 3 34

Looking for a Bart,Homer, Marge, Lisa, etc. shooter rod. If anyone is making one using a family member, let me know. Thanks.

0
0
0
#6837 1 year ago
 
CJC

cjchand

Pinside member

US Allen, TX

5y 53,800 566 1

Quoted from brainmegaphone:

I thought it was only to provide custom sounds in which case if you want to play the original game as intended it may not be a worthwhile solution for you.

You can get the original sound set on the PinSound site and I'll say that even just using those with the onboard-EQ the PinSound board is a noticeable improvement.

But, agreed that it's not worth the cash if you don't intend to use one of the custom mixes.

0
2
2
#6838 1 year ago
 
PCB

monkfe

Pinside+ Frequent

US Toms River, NJ

5y 91,300 1,643 13 6

Quoted from cjchand:

You can get the original sound set on the PinSound site and I'll say that even just using those with the onboard-EQ the PinSound board is a noticeable improvement.
But, agreed that it's not worth the cash if you don't intend to use one of the custom mixes.

...but the custom sound mixes are the best...I never use the original anymore....

0
1
1
#6839 1 year ago
 
CJC

cjchand

Pinside member

US Allen, TX

5y 53,800 566 1

Quoted from monkfe:

...but the custom sound mixes are the best...I never use the original anymore....

1,000% agree on both counts

Currently rocking the Baptiste mix, but Scandell's is great, too!

0
0
0
#6840 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Anyone have a source for the Homer head plate, plate #535-9198-00?

Or a way to repair it?

There has to be a lot of these in need of repair.

73BC1BD3-BF97-4B86-957B-D3CEF9A83857_1_105_c (resized).jpeg73BC1BD3-BF97-4B86-957B-D3CEF9A83857_1_105_c (resized).jpeg
0
0
0
#6841 1 year ago
 
TEZ

allsportdvd

Pinside member

AU Brisbane

13y 101K 2,327 21 45

I still need help with installing my Bart captive ball piece
The post at the rear is part number 254-5000-15 as per the manual but it’s way too tall for the space at the rear pictured below
The manual has a terrible picture. I need to see this installed without Bart in there and I’ve looked through so many shopout pics it’s not funny
Number 8 as per the manual pic

264CB1D3-F7FE-4527-83F3-AD5756951A99 (resized).jpeg264CB1D3-F7FE-4527-83F3-AD5756951A99 (resized).jpegA49411FE-24BB-42F8-B9BF-799C1372FF68 (resized).jpegA49411FE-24BB-42F8-B9BF-799C1372FF68 (resized).jpegF05F291A-115D-46A8-9A5A-84710439D23B (resized).jpegF05F291A-115D-46A8-9A5A-84710439D23B (resized).jpeg
0
1
1
#6842 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Quoted from allsportdvd:

I still need help with installing my Bart captive ball piece
The post at the rear is part number 254-5000-15 as per the manual but it’s way too tall for the space at the rear pictured below
The manual has a terrible picture. I need to see this installed without Bart in there and I’ve looked through so many shopout pics it’s not funny
Number 8 as per the manual pic
[quoted image][quoted image][quoted image]

The spacer is 1 7/8" tall.

9322AB95-4DF2-4788-AF92-462CB668057A_1_105_c (resized).jpeg9322AB95-4DF2-4788-AF92-462CB668057A_1_105_c (resized).jpeg
0
1
1
#6843 1 year ago
 
JRR

Da-Shaker

Pinside+ Frequent

US Grass Valley, CA

9y 85,050 2,408 14 49

Quoted from Bryan_Kelly:

The spacer is 1 7/8" tall.
[quoted image]

Looks right. It just needs to be straightened out. There is another post that goes under Bart, not sure if it’s longer.

8B01D08A-1AFD-4FBA-B74F-BCF777817D17 (resized).jpeg8B01D08A-1AFD-4FBA-B74F-BCF777817D17 (resized).jpegimage (resized).jpgimage (resized).jpgimage (resized).jpgimage (resized).jpg
0
0
0
#6844 1 year ago
 
???

El_Barto

Pinside apprentice

US Springfield, OR

4y 12,650 19

Quoted from Bryan_Kelly:

Anyone have a source for the Homer head plate, plate #535-9198-00?
Or a way to repair it?
There has to be a lot of these in need of repair.
[quoted image]

Put a tack weld or two on the spot that should be flat, then use a dremel to shape it so it fits properly. The repair should last longer than the original since the weld filler (mig wire or welding rod) is harder than most non-hardened steels.

0
2
2
#6845 1 year ago
 
BSK

Bryan_Kelly

Pinside+ Frequent

US Lakeville, MN

12y 135K 8,481 8 1

Quoted from El_Barto:

Put a tack weld or two on the spot that should be flat, then use a dremel to shape it so it fits properly. The repair should last longer than the original since the weld filler (mig wire or welding rod) is harder than most non-hardened steels.

Thought of that.

Decided to go this route instead.

Joe is checking with those at Stern to see if they still have some info on this piece.

C2A5140C-D887-48F2-B280-55C7558667BE_1_105_c (resized).jpegC2A5140C-D887-48F2-B280-55C7558667BE_1_105_c (resized).jpeg
0
6
6
#6846 1 year ago
 
EDM

beltking

Pinside+ Addict

6y 130K 2,205 2

Before and after a lot of work and MI pinball refinery powered everything yellow including apron and trails plus Bart base.

11D87AC9-FF8C-4128-BA2B-451B34289030 (resized).jpeg11D87AC9-FF8C-4128-BA2B-451B34289030 (resized).jpeg4B685909-EE36-426B-B949-F210F4BB81CE (resized).jpeg4B685909-EE36-426B-B949-F210F4BB81CE (resized).jpeg
0
0
0
#6847 1 year ago
 
JGT

JToeps

Pinside+ Frequent

US Redmond, WA

2y 66,800 389 9 30 1

that looks great, what side blades are those?

0
0
0
#6848 1 year ago
 
JRR

Da-Shaker

Pinside+ Frequent

US Grass Valley, CA

9y 85,050 2,408 14 49

Quoted from beltking:

Before and after a lot of work and MI pinball refinery powered everything yellow including apron and trails plus Bart base.
[quoted image][quoted image]

Super nice! Where do you get that topper?

0
0
0
#6849 1 year ago
 
EDM

beltking

Pinside+ Addict

6y 130K 2,205 2

Topper is kid robot stuffed animals but really well made and look perfect on top. Going to add lights to them.

0
0
0
#6850 1 year ago
 
MJF

mikespins

FlipMods

US Monroe, NY

3y 93,300 663 9 11

Quoted from beltking:

Before and after a lot of work and MI pinball refinery powered everything yellow including apron and trails plus Bart base.
[quoted image][quoted image]

Looks great! Nice donut shooter rod

Promoted items from Pinside Marketplace and Pinside Shops!
Trade
Machine - For Trade
The Simpsons Pinball Party
Springfield, MO
jdoz2
From: $ 99.99
Cabinet - Other
The Simpsons Pinball Party Lighted Magnetic Hinge Covers-Red
Lighted Pinball Mods
 
$ 35.00
Cabinet - Decals
Simpsons Pinball Party speaker panel decal C
Pinball Haus
 
$ 19.95
Playfield - Toys/Add-ons
Doughnuts and Confetti Flipper Bat MODs for TSPP
ULEKstore
 
$ 12.99
Playfield - Toys/Add-ons
Simpsons Pinball Party Pinball Machine Speaker Inserts
Daddio's 3D Printed Mods
 
$ 39.00
Playfield - Toys/Add-ons
TSPP Lamp Stand Flasher Cover
Sparky Pinball
 
From: $ 159.99
Lighting - Led
Simpsons Pinball Party LED Kit
Comet Pinball
 
$ 22.00
Cabinet - Shooter Rods
Pinbawlers Handmade Shooter Plate for Simpsons Pinball Party
arcade-cabinets.com
 
$ 29.99
Playfield - Toys/Add-ons
Stern Simpsons Pinball Party Cooling Towers - Set of 2
Daddio's 3D Printed Mods
 
$ 35.00
Cabinet - Other
3D Start Button -- Simpsons Pinball Party
Rocket City Pinball
 
$ 35.00
Cabinet - Decals
Simpsons Pinball Party speaker panel decal B
Pinball Haus
 
$ 44.95
Playfield - Toys/Add-ons
3D Flipper Caps Mod for Simpsons Pinball Party
PinBoss Mods
 
$ 79.99
Cabinet - Armor And Blades
The Simpsons PinBlades for Stern Pinball
PinGraffix Pinside Shop
 
$ 30.00
Playfield - Other
The Simpsons Pinball Party Lenticular Apron Cards
YouBentMyWookie
 
8,500 (OBO)
Machine - For Sale
The Simpsons Pinball Party
Gainesville, GA
bretthalsey
From: $ 159.00
Playfield - Toys/Add-ons
TSPP Video Display TV
Sparky Pinball
 
$ 25.00
Cabinet - Shooter Rods
Pinbawlers Shooter Plate for The Simpsons Pinball Party
arcade-cabinets.com
 
8,750 (OBO)
Machine - For Sale
The Simpsons Pinball Party
Pearl River, NY
Doc_VanNostrand
$ 25.00
Playfield - Plastics
The Simpsons Pinball Party drain lane plastics
Pinball Haus
 
$ 218.00
Lighting - Backbox
The Simpsons Pinball Party Pinball LED Strip Backbox Mod
Lermods
 
$ 16.00
Playfield - Decals
The Simpsons Pinball Party Pinball Kwik E Mart Decal Mod
Lermods
 
From: $ 9.99
Eproms
The Simpsons: Pinball Party (Stern) - ROM Upgrade chip set
Matt's Basement Arcade
 
$ 30.00
Cabinet - Other
3D Coin Reject Buttons - The Simpsons Pinball Party
Rocket City Pinball
 
$ 54.00
Playfield - Toys/Add-ons
The Simpsons Pinball Party Illuminated School Bus
Lermods
 
$ 99.99
Lighting - Other
The Simpsons Stern Glowing Instruction Cards
Lighted Pinball Mods
 
$ 125.00
Cabinet - Shooter Rods
Simpsons Pinball Party Donut Shooter Rod
FlipMods
 
8,000
Machine - For Sale
The Simpsons Pinball Party (2nd owner HUO, nice)
Dunkirk, MD
Superbiff
$ 25.00
Cabinet - Other
The Simpsons Pinball Party Coin Door Reject Buttons
Filament Printing
 
$ 29.50
Playfield - Plastics
The Simpsons Pinball Party sling shot plastics
Pinball Haus
 
Great pinball charity
Bringing the Joy of Pinball to American Children’s Hospitals
Project Pinball
1 ... 134135136137138139140141... 146
There are 7,278 posts in this topic. You are on page 137 of 146.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/tspp-owners-club-members-only/page/137?hl=troon47 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.