Check continuity on the board. Isolate where J120 is losing the circuit.
You're currently viewing posts by Pinsider rick471.
Click here to go back to viewing the entire thread.
Quoted from LordBreetai:Yes. They are parallel. And I checked that. Getting full continuity to the tip of the pin with a 0.2 ohm resist between pin tip and other end of the trace.
Looks like we were 2 secs apart on the posts. So if you are getting continuity from the male pins to the back, check continuity at the fuse. Not just the same side, but check the continuity from the from to back as well.
Kinda like keep making the "line" you are checking longer each time. hth
You're currently viewing posts by Pinsider rick471.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/trouble-with-tng?tu=rick471 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.