Hi,
First time installing a shaker motor and I can't seem to get it working. I mounted the shaker and board. Plugged the shaker into the board. Then power into board and finally the long brown wire into the back of the box in the empty connector.
The shaker is enabled in the settings but the coil test produces nothing. I read on another thread something about the ground not being connected to J16 but that looks OK as far as I can see.
Any ideas? I am stuck.
Thanks!
IMG_20200829_213036 (resized).jpgIMG_20200901_174450 (resized).jpgIMG_20200901_174037 (resized).jpg