Just completed this project with EL wire and a driver that has the light react to the music and you can adjust how sensitive it is.
Here is the link for the driver: http://www.fiberopticproducts.com/store/product_info.php?cPath=13_14_25&products_id=783
I removed the ramps and drilled them - easiest way - the tape sounds good now but won't hold up over time.
The driver above says it works on 9 - 12 volts so I took off the connection for the 9 volt battery and soldered it to a lead for the 12 volt splitter - works like a charm and you can run it in "music mode" or just have it on all the time.
New! Dark mode!
Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!