TRON: Legacy (Pro)
Stern, 2011You're currently viewing posts by Pinsider Pincrawler.
Click here to go back to viewing the entire thread.
I use a plastic coat hanger cut into a few pcs, and heated up with a heat gun to shape it, then wrap it in micro fibre towel, and slide it into the orbit from the couple areas you can fit the coat hanger between. I also find taking the 6 GI lights off the back of the PF will give you some more room to get into the back orbit.
Cheap and easy.
Quoted from michiganpinball:I take the back panel off. With the playfield in the service position (pulled forward, resting on the bottom of the sling coil brackets) it is easy to get to the four screws that holds this on. Five minute operation to remove, clean back of orbit area, re-install.
Parker
I will be trying this next time. This means I could even wax the back orbit!!! 
You're currently viewing posts by Pinsider Pincrawler.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tron-pro-cleaning-questions?tu=Pincrawler and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chilliwack, BC
Venice, FL