I installed the illuminated Recognizer MOD from Kimball this morning. It looks great. However, afterwards I tried running the recognizer tests. Test #54 and #55 worked, but #56 showed as failed. I inspected the movement in the back and the recognizer nicely moves all the way from the left to the right. It just seems that it's not being detected in the far right position.

Any advice on how to troubleshoot this? Thanks.

Figured it out. As it turns out, the motor behind the Recognizer arm was missing a screw! No idea what happened to it. I was able to find a replacement and tighten the other screw that was also coming loose and now all is good again!

IMG_0403.jpg