Quoted from Phantasize:So as i understand it, the game could very well have run with the pictured chip combination, but i should burn a new game rom for The IC14 slot?
This is the correct set up for Tri Zone mpu with Bipolar Roms the pads should be filled at IC 26 and IC 14 (install a socket at 14) to allow a secure thru hole connection
Rom at IC 14 Use:
Remove J4 and connect J3
Remove Prom's at IC 22 and IC 21
Fill in solder pads at IC 26
Install socket at IC 14
Suggest replacing socket 17 and 20
Flipper rom set: if they cannot be tested replace roms 17 and 20 along with IC 14
45ff8d53ad97800882ae55f0ca01aa6f00a6f23a (resized).jpg