Since it is a recent model, the only tool you should need is a 5/8 wrench. Longer list for older machines in unknown state.
I use a roll of stretch wrap from Office Depot to secure the head instead of a strap.
A cheap hand truck from harbor freight is fine unless you have a lot of uneven terrain or stairs. Get the one with the small castors as it makes it handy to roll around when you need too.
Height of the machine is 32 1/2 inches so make sure it will clear your vehicle.
Blankets as needed. I usually slide on one and protect the cab from the hand truck, but that’s it.
I stack and wrap legs in the static wrap and put power cord bolts and balls in the coin box. That’s how I remember that I picked up everything.
Below is how I load and unload as one man operation. I just slide the machine up and down on the hand truck. An explorer is just barely tall enough to work.
GL!
EAD72705-9FDC-4DA2-8A3B-79CB244984BF (resized).jpeg