You're currently viewing posts by Pinsider callmesteam.
Click here to go back to viewing the entire thread.
Quoted from swinks:How about this Tim, Hex post with a extension for the wire to travel up through. Happy to give you the design as STL's to help you out or at least try. This is a 1 inch tall transparent red version with a cut out at the top and bottom for the wires to enter and exit without the need to drill holes into plastics etc. Happy to do a bunch of stl files at all different heights for nothing.
wire hex post 1.png (Click image to enlarge)
wire hex post 2.png (Click image to enlarge)
wire hex post 3.png (Click image to enlarge)
Looks nice, but the wires would need to be unsoldered, run through the channel, then resoldered. A slit in the channel with the channel facing away from the player might work, though the wires would need to double-back at the top.
You're currently viewing posts by Pinsider callmesteam.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/translucent-and-solid-color-hex-posts-by-mezelmods?tu=callmesteam and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.