You're currently viewing posts by Pinsider TomGWI.
Click here to go back to viewing the entire thread.
First play pretty good. Didn't do well but is a lot of fun.
The Good:
LEDs are Excellent. I believe only the flashers are non led. The inserts are surface mounted on boards like the Tron LE.
Rotating Starscream is nice- see the bad
Skids and Mud Flap 2 ball Multiball fun.
Lot of voices I noticed that I did not hear when I played at Expo.
The Ironhide Mini playfield you have to hit the ramp a number of times and then the ball will be locked in the mini playfield for a set amount of time. It does play EM chime music when in there (like mnpinball said it would).
Very thick manual inside game next to shaker (figure some would be happy).
Megatron raises at Multiball and cannon shots as balls released.
The Bad:
The Megatron drop target launches the ball airborn unless hit from the side. I mean "launches"! I lost 2 balls over the lower lane plastics into the apron for a drain. MIght be a lot of cracked plastics.
I have gotten 2 balls stuck in between the platform for the starscream target and the rotating Starscream platform. This was annoying, esp in multiball. Possible I have to play with the slope a bit to help.
Only 4 balls and the tilt mech was found in the coin box. No extra anything.
Just what I've discovered so far.
Quoted from tatman9999:Can you disable the drop target? What do you think between the pro and the le? Are the upper play fields a waist or do you like them?
I think the LE is better than the pro. The Leds are really cool. I think they are even better than the Tron LE LEDs.
I haven't checked about the drop target but I'm thinking they have it reinforced some how so it doesn't break which is causing the issue. I played a few more games on it and only had one bang into the glass and drain. The outlanes are all the way up which I'll have to adjust that for my tastes.
I like the upper playfields. They give the game something more to shot for which I really like. So far I'm liking the modes which I have not finished one yet. Definitely an advantage to save the all spark for when you have a mode lit as it will give you more time to complete the modes. I'm still trying to get use to the lane changes. Very similar to Rolling stones where the left flipper will change the lanes for the left side only. Overall I'm satisifed but it's so new to me now that it's going to take some time to adjust.
Also I'm not sure about the electronically controlled gates. I did not trying to hit the orbits and have the ball bounce back at me when I thought I had hit a solid shot. Might just be me though. I will look into this more later. I promised a friend I would be over at his place to night so I sadly have to leave the game for a few hours.
Flipping as we speak. The only thing I don't like about flipping is you lose 2/3 of the screen. I can't shoot the whole game in 16:9 unless I rotate the camera. Usually I mount my tripod up in the air to the side of me to get the whole playfield and DMD. This time for a quick video, I just put the tripod in front of me which made game play a little awkward.
Mini playfield is ok. Finding out you have told do some nudging to get the ball going if it comes to rest in the front. Maybe that is why they out the EM sounds in.
Quoted from coasterguy:I like the LE over the pro still. The cannon looks cool though I was hoping for the 6 ball like they spoke of in the video over and over again. Do you feel that the mini Pf's break up the flow at all? The pro had plenty of flow for me when I played it many times at the expo.
No I don't think it breaks the flow at all.
Quoted from NimblePin:Congrats Tom!
NIB's are the best gifts you could ever give yourself.
Unless your "significant other" buys one for you!
(*sigh* Still waiting for that one... )
lol My wife doesn't like pinball very much. I would not say she hates it but I've only seen her play about 5 games. We agree about one think about pinball -- I am obsessed with it. I don't think that's such a bad thing though.
Quoted from txstargazer3:Looks like you have a great pin on your hands. Love the speed and the light show! Congratulations.
Quoted from The_Dude_Abides:Thanks for the excellent video Tom looks like a very fun pin! Congrats.
Thanks everyone for the kind words. It's all about pinball.
Here is another Video this time as the Autobots.
Towards the end of the video the ball flow onto Ironhide's shoulder and got stuck. Had the glass off to take the video. I took a few other videos (bad play) and I took an airball to the knuckle from the Megatron drop target backfire. Ouch. Dangerous game with the glass off.
Quoted from Socal_Steve:Watched video again. Does the game feel as fast as it looks? Also, noticed balls getting stuck on starscream a couple time, I can see that getting annoying. Wonder if anything can be tweaked or put there to prevent it.
It's fast but not too fast. The Starscream ball hangups seem better after more play. There is just too wide a gap between the two platforms. I don't know what can be done to fix it now. Maybe Cliffy knows.
Quoted from NimblePin:Did they color match the inserts or did they just use all white for the surface mounted LED's again?
I haven't checked the surface mount insert LEDs yet. The GI LEDs are red on the autobot side and white on the Decepticons.
Quoted from Socal_Steve:What's up with the pop lanes? Kind of tough to see from the vid. Are there 2 lanes or 3 lanes and appears to be 2 inserts for each lane. Guess I gotta watch your vid again darn lol. Thanks Tom.
There are 2 upper lanes with 2 inserts each. One side decepticons, other autobots.
You're currently viewing posts by Pinsider TomGWI.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/transformers-le-3?tu=TomGWI and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.