OP
Quoted from Bodean:
I have a Bally Strikes and Spares that lost the solenoid voltage. I traced it down to the transformer. ( Bally 122-125 ) Lug 2 and 6 are supposed to be outputting 25v. Lug 6 is doing its job, but Lug 2 is zero. These Lugs feed BR3 for the solenoid voltage. Is it possible to switch Lug 2 to Lug 6 and have the single Lug feed both sides of the bridge? Never had a transformer problem before in anything.

Voltage from the transformer is AC, and comes in pairs. You can't have one side of working and one not, unless you're measuring wrong. Measure on AC setting, one lead on each of the two lugs

You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/transformer-question?tu=zacaj and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.