Fernie, BC
Hi There, Long shot I know ... if you still have the HOT TIP plastic set I'd like to purchase.
Cheers,
Frank
(Topic ID: 89176)
Linked Games
Addams Family, The
Bally, 1992-
Amigo
Bally, 1974
-
Beat the Clock
Bally, 1985
-
Big Guns
Williams, 1987
-
Big Valley
Bally, 1970
-
Bram Stoker's Dracula
Williams, 1993
-
Centaur
Bally, 1981
-
Close Encounters of the Third Kind
Gottlieb, 1978
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
1 week later
Belvidere, IL
Quoted from Apinjunkie:I'm looking for the small plastic that is the right center lane near the top of a 1963 William's "Big Deal".
[quoted image][quoted image]
I scrapped/parted out a ‘63 Big Deal a few years back and kept them all. Need anything else why I’m looking tonight?
Quoted from Ditty:I scrapped/parted out a ‘63 Big Deal a few years back and kept them all. Need anything else why I’m looking tonight?
Yes, a hi-res scan for posterity 
2 weeks later
Quoted from GraniteStatePin:Looking for the center drop target plastic on Stellar Wars. thanks
still need one, thanks
Looking for the upper plastics on Gtb 1959 Seven SeasF01AFCFC-7B13-4983-AC4D-8E4A9F143286 (resized).jpeg
Or a good quality scan.
4 weeks later
North Adelaide
Need the center plastic on Big Shot
0C14350A-642B-4C5C-BC9A-1C2AA2EF08C8 (resized).jpeg
Added 12 months ago: Got it. Thanks!
1 week later
1 week later
ISO the following two plastics (pictured below) for Bally Eight Ball Champ.
Also have the following plastics available if anyone is interested/looking:
-Complete Bally Star Trek
-Complete Williams Scorpion
-Partial Stern Stars
-Partial Williams Space Mission/Odyssey
-Partial Williams Firepower
IMG_3546 (resized).jpeg 1 week later
Quoted from gdonovan:Anyone with used Fathom plastics?
I have a complete playfield set, still with the protective film.
Quoted from Dakine747:I have a complete playfield set, still with the protective film.
I have a beater I'm looking to make from scratch, what do you need for them?
Quoted from gdonovan:I have a beater I'm looking to make from scratch, what do you need for them?
Sending a pm.
1 week later
Quoted from Pinzzz:Anybody have a Zaccaria Devil Riders top upper playfield plastic?
I think I do. Can check when I get home today. Send me a PM and follow up with me.
Quoted from Mikespinball:I think I do. Can check when I get home today. Send me a PM and follow up with me.
PM sent.
1 week later
4 weeks later
Have new in package CPR Shadow and Swords of Fury plastic sets. Prices will be cheaper than whatever the cheapest price available is. Message if interested
2 weeks later
I've posted some used partial plastic sets for sale in the marketplace
Q*bert's Quest https://pinside.com/pinball/market/classifieds/ad/161091
Getaway HS2 https://pinside.com/pinball/market/classifieds/ad/161090
World Cup Soccer https://pinside.com/pinball/market/classifieds/ad/161087
Jack*Bot https://pinside.com/pinball/market/classifieds/ad/161086
Quoted from Hammerhead:I've posted some used partial plastic sets for sale in the marketplace
Q*bert's Quest https://pinside.com/pinball/market/classifieds/ad/161091
Getaway HS2 https://pinside.com/pinball/market/classifieds/ad/161090
World Cup Soccer https://pinside.com/pinball/market/classifieds/ad/161087
Jack*Bot https://pinside.com/pinball/market/classifieds/ad/161086
Still available, 25% price drop
2 weeks later
Looking for Gilligan's Island plastics. Specifically the "Thurston Howell and Lovey" plastic that sits over the LAGOON standups and the SS Minnow plastic on the back board. The Maryann sling is warped but maybe I can get the warp out of it. Thanks
1 week later
I see there are some people that have listed Atlantis plastics but they don't state which Atlantis so I'll just make a new post here. I need two plastics for a 1975 Gottlieb Atlantis, would buy the entire used set if the two I need are good. Let me know what you have.
Thanks,
John
Quoted from Dayhuff:I see there are some people that have listed Atlantis plastics but they don't state which Atlantis so I'll just make a new post here. I need two plastics for a 1975 Gottlieb Atlantis, would buy the entire used set if the two I need are good. Let me know what you have.
Thanks,
John
I have a partial set, missing one of the small ones on the right side, and the one for the slingshot is damaged by the bottom hole. The clear plastic is also damaged…
IMG_0614 (resized).jpegWow, thats what I'm looking for. The long one on the left and the one in the upper right but man those sure are yellowed compared to the ones in my game so I don't think it would be a good match with the other existing plastics. Here's pictures from 2006, but they still look the same today. What do you guys think?
John
Atlantis middle playfield area (resized).jpgAtlantis upper playfield area (resized).jpgQuoted from Dayhuff:I see there are some people that have listed Atlantis plastics but they don't state which Atlantis so I'll just make a new post here. I need two plastics for a 1975 Gottlieb Atlantis, would buy the entire used set if the two I need are good. Let me know what you have.
Thanks,
John
I may have some, let me check.
Quoted from Dayhuff:Wow, thats what I'm looking for. The long one on the left and the one in the upper right but man those sure are yellowed compared to the ones in my game so I don't think it would be a good match with the other existing plastics. Here's pictures from 2006, but they still look the same today. What do you guys think?
John
[quoted image][quoted image]
I had remarkable success restoring yellowed plastics using the hydrogen peroxide/sunshine method. Basically, you submerge them completely in the peroxide, and place them in direct sun for a day or two. Doesn't affect the artwork at all, but takes the yellow out. I was startled how well it worked for me. There's a few threads on this topic I believe, here on Pinside.
Quoted from Dakine747:I had remarkable success restoring yellowed plastics using the hydrogen peroxide/sunshine method. Basically, you submerge them completely in the peroxide, and place them in direct sun for a day or two. Doesn't affect the artwork at all, but takes the yellow out. I was startled how well it worked for me. There's a few threads on this topic I believe, here on Pinside.
Hmm.....haven't heard of that one. Thanks for the tip I might have to try it.
John
Quoted from Dayhuff:Hmm.....haven't heard of that one. Thanks for the tip I might have to try it.
https://pinside.com/pinball/forum/topic/say-goodbye-to-old-yellowed-plastics
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
