Quoted from Adm927:Looking to buy plastics for a Gottlieb Masquerade pin. I need the 2 small ones that go in the middle on both sides. But o will buy a whole set if needed.
[quoted image][quoted image]
Read this to try to repair your plastics.
https://pinside.com/pinball/forum/topic/repairing-plastic-playfield-features-onsite-vids-guide
Got close to the Entire Kit of Star Trek 25th Anniversary plastics I don't need .. $ 169.00 and up I have seen at Marco , Madd amusements etc ..
I'll let Em go for $ 90.00 to yr door in the US .. What U see Is what U get ,,, PM me if anyone is interested .. Later .. ((( PayPal )))
Chopper etc ,, 006 (resized).jpgStar Trek 25th (resized).jpg
Quoted from bluespin:Read this to try to repair your plastics.
https://pinside.com/pinball/forum/topic/repairing-plastic-playfield-features-onsite-vids-guide
My plastics are not broken , someone installed the wrong ones in those 2 spots. I’m just looking to put the correct ones back on it.
I have a mostly complete set of CPR/Original Black Knight plastics. Complete except the top left piece where the ball pops out is broken (see photo). The pieces that require rivets are all brand new CPR plastics because I don't have the skills/tool to rivet them. Everything else is the old ones from my machine.
I need: Judge Dredd plastic under nuclear towers.
I need: Earthshaker plastic above #5 popout.
I am aware I can buy full CPR repro sets for these and am just looking for singles (can't find these on ebay).
Haves/wants current as of today, 3/2/2021
Thanks!
f2a9d9fa4dbc58375f15faaa4852e24ac30b10cf (resized).jpg Added over 3 years ago:Edit I found the Earthshaker Plastics... Still looking on Judge Dredd
Update: Top Card plastics sold.
Quoted from goldenboy232:Have sets of the following available (pretty sure all are complete in terms of having all the plastics, but all have at least one plastic cracked, warped, or a tip broken off somewhere in the set). But might be helpful to someone:
GTB: Jungle
GTB: Top Card - SOLD ($10)
GTB: Quick Draw / Fast Draw
GTB: Jacks Open / Lucky Hand
GTB: Atlantis
$10 per set plus postage
I'm looking for a Flash plastic and have an ad on Pinside marketplace. A fellow Pinsider recommended also posting here as well.
I don't have any plastics to trade, but I'll gladly trade cash for it.
Thanks!
https://pinside.com/pinball/market/classifieds/ad/99288
Added over 3 years ago:No longer needed. Pin has been sold.
Do you have a pic of the one you need? I have a few JD plastics. I MIGHT have what you need.
Quoted from gdonovan:Get on the list, he does runs time to time. I got in on the last run.
Fair warning, the plastics are well cut and print is sharp but the blues are off color.
back pieces were shit, didn't fit.... and colors were horrible on all of them.
Quoted from Ceckitti:Do you have a pic of the one you need? I have a few JD plastics. I MIGHT have what you need.
I am looking for this guy... The one under the Nuclear Towers but above the captive balls. Thanks!
pp (resized).pngQuoted from SantaEatsCheese:I am looking for this guy... The one under the Nuclear Towers but above the captive balls. Thanks!
[quoted image]
I know have that one circled, as well as the yellow and black one right above it in the picture. I also think I have a NOS set of slings. Ill dig them out this weekend and double check.
IMG_9699 (resized).JPGIMG_9700 (resized).JPGQuoted from Ceckitti:I know have that one circled, as well as the yellow and black one right above it in the picture. I also think I have a NOS set of slings. Ill dig them out this weekend and double check.[quoted image][quoted image]
I would be very happy with the two you have pictured. I have both, but mine are both cracked or broken in the middle. I'll send you a PM.
Quoted from AlexF:Looking for small clear Night Rider plastic that sits in front of lower pop bumper. Part # A-2890-121.
[quoted image]
I can look at my machine and duplicate one from lexan if you're down.
Quoted from Jahkub:I can look at my machine and duplicate one from lexan if you're down.
That would be sweet. Thank you! PM sent.
https://pinside.com/pinball/forum/topic/funhouse-plastics-used#post-6211397
still have these funhouse plastics available
Quoted from dabomb1:Looking for a set of Johnny Mnemonic plastics.
This company makes this set but is out. Add yourself to the wishlist and once enough people are interested he’ll produce them again.
https://www.retrorefurbs.com/shop/johnny-mnemonic-pinball-plastic-set/
OR you can email pps and ask if they’ll make them.
For sale original Jurassic Park plastics.
Will only contain the plastics that are shown in the pictures. THIS IS NOT A FULL SET!!!
Asking$50 usd. Ships from canada so i will have to get you a shipping quote depending on your address.
All have the usual screw imprints. One sling shot is missing a corner, and one that i see has a crack as shown in the picture.
They are not all perfectly flat so you will have to heat them up yourself.
IMG_3983 (resized).JPGIMG_3984 (resized).JPGIMG_3985 (resized).JPGIMG_3986 (resized).JPGIMG_3987 (resized).JPGIMG_3988 (resized).JPGIMG_3989 (resized).JPGIMG_3990 (resized).JPGQuoted from AlexF:Looking for small clear Night Rider plastic that sits in front of lower pop bumper. Part # A-2890-121.
[quoted image]
I don’t know if you ever got one but someone sells the center plastic in the Pinside shop.
https://pinside.com/pinball/market/shops/1256-upkick-pinball/04984-night-rider-center-plastic
Quoted from Murphdom:I don’t know if you ever got one but someone sells the center plastic in the Pinside shop.
https://pinside.com/pinball/market/shops/1256-upkick-pinball/04984-night-rider-center-plastic
Yes! I did buy one from them. It was very nice and a good price. Pinsider Jahkub also generously offered to make me one. Seeing Upkick had it listed as available I just went ahead with that. As frustrating as Pinside can be at times stuff like this is a great reminder it can also be an excellent resource.
still looking for this plastic for my Black Rose
Untitled (resized).png Added over 3 years ago:this is the plastic for the ball lock area
Hunting some key fobs if anyone can help out:
Johnny Mnemonic
Simpsons DE
Harlem Globetrotters
Thanks in advance!
Quoted from gdonovan:Looking for upper left Flash Gordon plastic. Top of the arch, left side.
Still looking for this, one of the last pieces needed.
plastic_corner_small (resized).jpg Added over 3 years ago:All set.
I’m looking for a set of plastics for Strange World. I have 1 that is chipped and 1 that is broken. I would buy those or a whole set. Let me know what you have
I am looking for the slingshot plastic for a Gottlieb Baseball, please let me know if you have those or a whole set you'd be willing to sell.
Quoted from SWMurphy:I am looking for the slingshot plastic for a Gottlieb Baseball, please let me know if you have those or a whole set you'd be willing to sell.
I will send you a message.
I have a good amount of decent plastics from a Monopoly PF I stripped down from a destroyed cabinet. If you are looking for a certain one reach out and I’ll see if I have it.
Anybody here need some Gottlieb Counterforce plastics, let me know. Here is the buzz blower. The drop target plastic is junk. The rest are fine.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/trade-your-plastics/page/14?hl=crazypinballguy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.