I am looking for a pinbot plastic piece for a project. Preferably a promo piece or keychain piece. I have plastics or pinball goodies to trade or I can just buy outright.
I am looking for a pinbot plastic piece for a project. Preferably a promo piece or keychain piece. I have plastics or pinball goodies to trade or I can just buy outright.
Quoted from AlexF:You're going to part it? You've resurrected worse.
Actually, you re correct, have resurrected worse. But everything in the back box was rusted. The back box itself was falling apart to the point of non repairable. The lower cabinet back panel was shot and the bottom of the cabinet had fallen out because the bottom slot was broken all around the cab. The back glass was mostly clear. And, sorry to say, it is not a popular game. So 6 or 8 hundred dollars later for new cabinet or major fix and new back glass, and dozens if not hundreds of hours work to get it going. And I would have a 6 or 8 hundred dollar game not many people want. So made the difficult choice. First time in the 41 games I have purchased. And hopefully the last. Have a Doodle Bug in about the same, maybe a little better shape, and it is definitely in line for fixing up.
Quoted from DCRand:Actually, you re correct, have resurrected worse. But everything in the back box was rusted. The back box itself was falling apart to the point of non repairable. The lower cabinet back panel was shot and the bottom of the cabinet had fallen out because the bottom slot was broken all around the cab. The back glass was mostly clear. And, sorry to say, it is not a popular game. So 6 or 8 hundred dollars later for new cabinet or major fix and new back glass, and dozens if not hundreds of hours work to get it going. And I would have a 6 or 8 hundred dollar game not many people want. So made the difficult choice. First time in the 41 games I have purchased. And hopefully the last. Have a Doodle Bug in about the same, maybe a little better shape, and it is definitely in line for fixing up.
Trust me I understand. Always respect when one is transformed from a pile of parts but it's a labor of love. After doing a few like that it can get exhausting. I'm having a hard enough time getting enough motivation to finish shopping my Ship Ahoy and it's fairly clean.
Looking for a right slingshot plastic for Diner. Prefer not to have to buy a whole set. I have other plastics or $ to trade.
The lower portion of right ramp to left inlane would be a bonus. Where the ball drops on the lower portion is slightly cracked.
Quoted from pinwhoo:Looking for a right slingshot plastic for Diner. Prefer not to have to buy a whole set. I have other plastics or $ to trade.
The lower portion of right ramp to left inlane would be a bonus. Where the ball drops on the lower portion is slightly cracked.
The pair of slingshot plastics is available at Marco's for $24.95. The might have other plastics.
https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=diner+plastics
Looking for right slingshot & the plastic over the kick out hole for Earthshaker. Have a couple of Pinbot pieces and cash.
If anyone’s looking for a Xenon set
https://pinside.com/pinball/forum/topic/xenon-plastics-
Any chance someone has a spare/used Upper left corner plastic for Stern Lightning?
That's the only broken one and i'd rather bot buy a whole set...
Looking for Congo inlane guides... Mine has really crappy repro/home made ones
Quoted from Jjsmooth:I have an almost complete set (I believe missing 1) of Congo plastics, new.
$75 shipped.
Repro or NOS?
Quoted from AntennaMan:Looking for the plastic over the subway entrance on Judge Dress.
Didn’t know the Judge was a cross dresser!
Quoted from freddy:Didn’t know the Judge was a cross dresser!
The things you can learn on the Internet.
Quoted from marioparty34:No idea what game this goes to. Protective film is still on both sides. It's yours if you pay for shipping.[quoted image][quoted image]
#high-speed ?
Quoted from Murphdom:Looking for the center plastic for a Gottlieb 2001.
Also, I have an almost complete set of drop-a-card/pop-a-card plastics if anyone needs them
Of your drop-a-card plastics, if still available, which are missing?
Hi guys, I have broken the plastic that goes on the bumper cap of No Good Gofers. Its just the clear one that has a red post hanging down on it . If any one has this to spare I am a willing buyer. Cheers, Terry.
I have these AFM plastics including the 3 ramps. Middle ramp is broken but works fine. Looking for promotional plastics or pay it forward to the next pinhead. If you need em take em. Centaur up next from restore just need to find them
543AB022-7B40-474C-8650-DBBA7FA2F062 (resized).jpegHi,
I am looking for the very small plastic just to the left of the coffin ramp on BSD. See the URL below for photos.
https://pinside.com/pinball/market/classifieds/ad/106049
Take a look at my list of games to see which games for which I would likely have some plastics that may be available in trade.
Gord
Edit: weeze hooked up a deal on a full set so I’m all good.
Looking for the right sling plastic for a Bally bow and arrow.
Really hoping to avoid having to buy a whole set, or the equipment( printer, petg, scroll saw, decal stuff) to recreate it.
Thanks!
Quoted from bluespin:Get on the waiting list
I have been for about 3-4 months with no notifications of new stock. Luckily, CPF received a set and should be making reproductions in the near future. I’m patient.
Was cleaning out the garage and found a full set of Flash plastics. I haven't had that machine for a few years now. Anyway, a little bit of yellowing and some heat warping, but nothing that can't be fixed with a heat gun. In fairly good shape overall. If someone want to pay $5 over postage costs, I am happy to send these off to a new home. PM me.
1.jpeg2.jpeg3.jpeg
EDIT: These are spoken for and no longer available.
Looking to buy iron maiden pro plastics ....only need piece of mind eddie (left pop) and cyborg (inside right ramp). If anyone is willing to sell please d.m. Me
Have sets of the following available (pretty sure all are complete in terms of having all the plastics, but all have at least one plastic cracked, warped, or a tip broken off somewhere in the set). But might be helpful to someone:
GTB: Jungle
GTB: Top Card
GTB: Quick Draw / Fast Draw
GTB: Jacks Open / Lucky Hand
GTB: Atlantis
$10 per set plus postage
Looking for a couple Eight Ball Champ plastics. I need the "i" (upper left) and "t" (lower right) plastics. A full set would be ok too.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/trade-your-plastics/page/13 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.