Addams Family, The
Bally, 1992
Amigo
Bally, 1974
Beat the Clock
Bally, 1985
Big Guns
Williams, 1987
Big Valley
Bally, 1970
Bram Stoker's Dracula
Williams, 1993
Centaur
Bally, 1981
Close Encounters of the Third Kind
Gottlieb, 1978Quoted from Dee-Bow:I'm more comfortable with off color blue than our dollar conversion! thanks tho.. I'll probably be reaching out to them soon.. it's a project pin.. have to get to it eventually!
Here is a comparison shot. It kills me people cant get the colors right.
2f74ae83523788d2fb79714423a191e4af35daf8 (resized).jpgI have the majority of a repro set for BSD and a spare set of sling plastics for Johnny Mnemonic, all unused. Also have various used upper playfield Black Hole plastics.
Would be willing to trade for various needed plastics for a Williams Fire! or Cyclone.
I have some NBA Fastbreak slingshot plastics, and a bunch of used Sopranos plastics in good condition I would be willing to trade.
I need badly one clear plastic -18 from the Sopranos, Id pay cash too of course.
gate (resized).jpgplastic2 (resized).jpgQuoted from sixleggeddog:Looking for the long bottom right plastic for a Jumping Jack (mine's cracked in half) if anyone happens to have one:[quoted image]
Still looking for this plastic if anyone happens to have one.
Anyone with a junk set or partial of plastics for Last Action Hero? Broken is fine!
Working on some wall art with a spanked playfield.
Quoted from Dee-Bow:Looking for both robocop sling plastics
Looking for a left sling for Playball / Home Run.
Replaced a set of Jacks Open with repros. Three of the originals (right sling, upper left and big center one) are cracked/damaged, but left sling, two smaller side pieces and upper right piece are whole and available if interested.
Quoted from madamyates:Out of stock. Has been for months.
Get on the waiting list
Quoted from bluespin:Get on the waiting list
I was on the list and I think it was a month or two tops before the became available.
Colors are off slightly but beat broken stuff. I made clear lexan protection for mine.
2f74ae83523788d2fb79714423a191e4af35daf8 (resized).jpgStern Dracula plastics
$80
https://www.facebook.com/groups/359318007478937?view=permalink&id=3534292099981496
Seller Pinsider Schmitty
I have a few complete and a few partial plastic sets left all prices USD plus shipping.
full liberty bell set $50 plus spinners 80
Full bronco $50
Full solar city $45
Full recel lady luck $50
Partial bronco $20
Partial jet spin $10
Partial CC showtime $30
Partial CC soundstage $30
20200824_161946 (resized).jpg20200824_161950 (resized).jpg20200824_161959 (resized).jpg20200824_162004 (resized).jpg20200824_162007 (resized).jpg20200824_162012 (resized).jpg20200824_162016 (resized).jpg20200824_162025 (resized).jpgDoes anyone have the upper right hand corner plastic for Meteor?
(This is the one with the big four pointed star behind the spinner)
Quoted from bluespin:Anyone have the large plastic behind the drop target bank on Jacks Open?
That sucker always gets broke, I ended up buying a set from PBR
http://www.pbresource.com/pfplayf.htm
$65 bucks, can't beat that with a stick.
gtb-c16410 (resized).jpgQuoted from gdonovan:That sucker always gets broke, I ended up buying a set from PBR
http://www.pbresource.com/pfplayf.htm
$65 bucks, can't beat that with a stick.
[quoted image]
Thank you. I’m so used to checking Pinball Rescue that I didn’t think to check with Pinball Resource. Pinball Resource is much cheaper at $64 vs. Pinball Rescue at $90.
Quoted from bluespin:Thank you. I’m so used to checking Pinball Rescue that I didn’t think to check with Pinball Resource. Pinball Resource is much cheaper at $64 vs. Pinball Rescue at $90.
Plus the shipping.
Quoted from NinJaBooT:Are there repro HeatWave plastics out there?
Pinball Rescue in Australia makes them. They’re only offering DHL shipping which is $34usd.
http://www.pinballrescue.net/index.html
https://pinside.com/pinball/forum/topic/firepower-plastics-partial-set#post-5886074
Have these available for anyone in project mode.
I am in search of a “Lites Diver W/L” plastic for a Bally Atlantis. This plastic is currently missing altogether on the machine I am working on, so I would be interested in one of any condition, as long as it was still usable.
Thanks in advance!
aa33ba8e56805cdb0ca2c7445c31f2c331aa2331 (resized).jpgHello, looking for Sinbad plastics (any / all of them), pop bumper caps for sinbad (100 pts).
Will pay or trade. Lots to trade, off the top of my head, time warp (used) plastics and caps, Buck rogers plastics and manual / cards, Flash plastic, misc parts lots of posts etc.
Quoted from koji:Hello, looking for Sinbad plastics (any / all of them), pop bumper caps for sinbad (100 pts).
Will pay or trade. Lots to trade, off the top of my head, time warp (used) plastics and caps, Buck rogers plastics and manual / cards, Flash plastic, misc parts lots of posts etc.
Pinball Resource has complete plastic sets.
http://www.pbresource.com/pfplayf.htm
and lots of pop bumper caps.
http://www.pbresource.com/pfbumper.htm
Quoted from bluespin:Pinball Resource has complete plastic sets.
http://www.pbresource.com/pfplayf.htm
and lots of pop bumper caps.
http://www.pbresource.com/pfbumper.htm
Thanks.. Sorry, should have clarified, I'm looking for someone who is selling or has a used set and wants a fair price or trade. Not looking to pay retail price ATM. Thanks-
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/trade-your-plastics/page/12 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Media, PA
Wien
Mundare, AB
Boulogne-sur-mer