(Topic ID: 328291)

Toy story four bad switch

By HepperSchepp

86 days ago

Topic Stats


Linked Games

Topic Gallery

View topic image gallery

264CD3D5-10F3-4BE3-AD71-9F2B6117678F (resized).jpeg

#1 86 days ago

Upon turning on, I’m asked to go to the diagnostics. The diagnostic test report says check matrix switch number 37. 9Left ramp diverted stuck closed.” this switch 37 in the schematics shows is the strange black device which is on the harbor trail crossover I’ve taken the glass off and played around with the switch, but nothing seems to change the switches status in the matrix switch test where it continues to say bad switch that is it colored block. Any thoughts on what I should do and what this switch even does.

264CD3D5-10F3-4BE3-AD71-9F2B6117678F (resized).jpeg
#2 86 days ago

The black block is the switch cover, remove it and you might find a broken wire.

#3 85 days ago

I might be late to the party here, but for me, I had to loosen that switch a bit... After removing the cover, you could try adjusting the screw there a bit to see if you can find the sweet spot where it will stay in place and still actuate the switch properly. Make sure it registers when a ball passes through, not just your finger. Good luck.

2 weeks later
#4 70 days ago

After some fiddling we determined that it presses on a small black button that is the switch and it was stuck depressed

Promoted items from the Pinside Marketplace
Machine - For Trade
West Chicago, IL
Machine - Wanted
Rochester, NY
$ 15.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 18.50
Playfield - Decals
$ 649.95
Lighting - Interactive
Pin Stadium Pinball Mods
$ 10.00
Cabinet - Other
Filament Printing


Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/toy-story-four-bad-switch and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.