OP

Quoted from Loganpinball:

List started. Thanks for the interest. Just a heads up I do $50 an hour plus materials and I make 2 or 3 sets to get a average time to figure out final costs. And I will playtest the hell out of first (figure things out) set.
Extended the transition ramp, starting on left return.. i will update this post as the night goes.
Trying wireformed Slink.
Almost done with the head. I like it!
[quoted image][quoted image]
[quoted image]
[quoted image][quoted image]

OP

Quoted from Loganpinball:

Thanks!
Need to work on legs, but I like it..[quoted image]

OP

Quoted from Loganpinball:

Done for tonight. Adding eyes and a hind section. It will look alot better when I stone, sand and polish it.
The long right wireform I am going to shape it like Bo peeps sheppards cane. I think it will work visually, but I have to build it to see it..

Thats one of the nicest complements I have ever got on pinside. Thank you. I had a booth rented at Pintastic, but my wife went in to the hospital and I had to be here. I was hoping to show Jack my Guns and Roses mod at the show.
[quoted image][quoted image][quoted image][quoted image]

OP

Quoted from Loganpinball:

Thanks. I am not restrained by costs (at least on my own machine) and I am not sure if this can be made by machines.. I have 4 hours on this and not done.

Thank you, I really enjoy making crazy wireforms for my machines. Some are a hit and others fall flat. I did not sell a single Gnr kit due to price, but that set takes 16 hours to make. I have found out once you breach $350 and up you loose alot of people.
I fugured out eyes thanks to my sons art class!
[quoted image][quoted image][quoted image]

OP

Quoted from Loganpinball:

Maybe, but this is the figure how to build it set. 4 legs and now a spring tail. Its very hard to tig weld thin plates without having very noticeable welds. I think it might hurt the visual.
[quoted image]
[quoted image][quoted image]

OP

Quoted from Loganpinball:

Adding the remaining wireform and trying to figure out a different design over another ball drop rail over another one and I think I got it!
The end of the wireform has a bend upwards and the ball goes up and drops into lower form. Very happy and I have never seen anything like this and that drives me more. Fast balls drop without issue and even if I place the ball on the wireform midway it still drops!
Once I saw that working just looking at it and I saw Forky! I will get back to it tonight, but I am very happy today! The ring will be his arms and repositioned. Then I will work out his feet.
[quoted image][quoted image][quoted image]

OP

Quoted from Loganpinball:

I was asked for measurements. I made Slink out of wireforms as I can scale it to any size I need. If there is a slink toy close to this size please feel free to let me know. I am up to working a toy head and tail if there is one the right size.
I have a few minor adjustments written down for the next toy story set. I am playing these everyday to test.
My schedule as of today is To make a few Star Wars pro kits, then Mandalorian, followed by Toy Story and just added a simplified xmen set. I will be making them in that order. [quoted image][quoted image]

OP

Quoted from Loganpinball:

I am not sure if I can figure this slink toy out to use as a ball guide. I will try later on, but as a add on somewhere else I think it would look great.
[quoted image][quoted image]

OP

Quoted from Loganpinball:

This is so happening! Very quick video of the head in action. Might change scale of slinky rings. I just dont have any other size in the shop.. but I say hell yes..I am ordering more of these slink toys. If your in for this please let me know.

OP

Quoted from Loganpinball:

I got my first 10 Slinks today which is good because I lost parts for the first already. I have a welded ring in the front and 2 in the back. I mounted the 4 legs and a half assed rear section, pun intended. I have the toys slinky installed over the guide rails and zip tied at each end. I want everything to be able to be cleaned. If the zip tie is cut you can slide the slinky to one end and clean the other. The j hook limiting guide works great. Progressing..i want to figure out a few more things such as the front body…
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]