Totem
Gottlieb, 1979Hey guys I am brand new to pinball and just picked up Totem by Gottleib. I am super pumped to finally own a pinball machine. There are a few playfield targets that are not working and would appreciate any feedback you guys have on getting things back to working order. Thanks in advance!
1588267711585-538721875 (resized).jpg1588267637269-2136781120 (resized).jpgThe vari target scores only on the 3000 point area. Nothing happens at 5000. When the pinball rolls over 'D' and the 'Add 5 bonus' lane nothing happens as well. Thanks. 
And http://www.pinrepair.com/sys1/index.htm
Pay attention to low voltage nfpd high voltage contacts.
Well after some troubleshooting I've managed to get the vari target and three of the roll over switches working. Replaced a few molex connectors on J7. Pins 10 and 11 were in rough shape. Also cleaned the switch contacts. Thanks again for the links.
I know this is an old thread. Just wanted to mention you have a rare alternate playfield with that black stripe.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/totem-troubleshooting-?hl=clintonian and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Coquitlam, BC
Jasper, AR