Just got a Tales of Arabian Nights and half the back box lights are not working all on the string of purple & white-purple lamps. Checked all fuses and connectors. The lights ALL come on when the machine is turned on cold and then the problem string flickers off and stays off about 1 minute later. No wiggling of wires or connectors make them come on so its must be when a component warms up. I've got to think there is a diode or other board component on the Power Drive Board that is burning out. I am enclosing a photo of the lights out and a photo pointing to a lower left corner section of very blackened board around the D26 - D32 diodes. I'm guessing this is a common problem (I saw something about it on Pinkwiki). I'd just appreciate if someone can point me in the right direction. If just a few diodes, I can replace myself. If retracing the board circuits or extensive troubleshooting, I might as well pull it and send it out to a pro. Thanks for any pointers you may have.