Really need some help trying to figure out why I have no insert lights in TOTAN. Game plays fine, and I even get flickering GI lights. All LED points on the Power Driver board are lit as they should be per the manual. I've checked connectors, pushed in the ASIC chip, checked the ribbon cables between MPU and Power Driver board...still nothing. I measure the voltage at the 18V test point and it read 17.6.
Really would ask any fellow TOTAN owners to take a hi-res picture of the backbox and power driver board showing all connectors. I've found a couple of connectors not in the right spots (if the manual is correct).