I’m back in the club with my second totan I picked up last sunmer. This second one is better than my first. Great of and cab, no fade. I have it shopped and clean. We love it. Wife says I have to keep it and some day give it to my baby girl.

The blue powder coat looks great drfrightner

Here’s a mystery driving me nuts.
Party last sat night
Grandkids going nuts on my games hammering flippers everywhere.
At some point i smell a burning smell. Try to figure out what pin is cooking down.
Alcohol was involved lol (not the kids)
Totan smells funny. Shut it down.
Looked at it today. Bunch coils won’t work. Blowing f3 on power up.
Figure I have multiple issues so slap in my fresh rotten dog and start to test.
Most coils now working but 3 won’t fire.
Left divertor, ramp divertor and vanish magnet dead as doornails.
No further fuses have blown and I’ve double checks connectors.
So any ideas what going on here?
Vanish ohms at 5.2
Ramp divertor ohms at 2.0
Replaced left divertor coil because I had one.
All voltages are good. All fuse good.
What am I missing?

i slept on it and figured it out. Q 26 was blown from a shorted coil. when I put the rottendog in it blew same transistor but didnt blow the fuse.
somehow some where those 3 coils are associated. replaced bad transistor and the others all work now. learn something every day I guess

exactly, so somehow those coils are associated. as soon as i replaced the bad transistor the other 2 started working. would need Rob or someone to explain that to me.

Got mine back up and running. Will post what happened and the fix in case anyone
In future needs Info for similar problem.
Ramp diverter coil shorted or transistor 26 stuck on [burnt the paper off the coil] and took out transistors 26,81,84 all at the same time. More than likely the transistor open burnt the coil I would think. Those 3 are linked somehow, must share a wire.
Diodes and resistors were all good.

read back, bunch posts about the same thing. in test mode you can run a genie test, sucks the ball down and the ball rolls through all the switches.
if it passes that test it should clear error. if not it will show you what switch is bad

I would guess that you have 1 switch that is hit and miss. micro switches are cheap, replace them all in that trough for insurance.

sometimes games give ghost errors, example my tales game just fried the divertor coil and ive replaced it. works fine in test and game play but still shows it is broken when game it turned on. my Tzone has always gave me a clock is broken error but it has always worked fine.
attack mars will show a broken divertor error sometimes and if i go to test and roll a ball through that a few times it will go away. it actually
says in the op manual how to clear that so when it was made they knew they threw errors up. weird

I have the PinWoofer kit in my totan. Real easy plug and play full speaker system with
All user friendly sound adjustments just inside coin door. Good bang for the buck!

ive got a pile of the white plastic white water backers, who made the decals?