Total Nuclear Annihilation
Spooky Pinball, 2017You're currently viewing posts by Pinsider twhtalm.
Click here to go back to viewing the entire thread.
Would it be possible to pull the control signal for this mod from the reactor display? It's already 0-100/critical and could be easily used with an arduino to control either a fan or leds. Addressable LED rings are readily available and would be perfect for this project. One of these rings could hide easily under the fan artwork next to the locks.
Quoted from twhtalm:Would it be possible to pull the control signal for this mod from the reactor display? It's already 0-100/critical and could be easily used with an arduino to control either a fan or leds. Addressable LED rings are readily available and would be perfect for this project. One of these rings could hide easily under the fan artwork next to the locks.
https://www.adafruit.com/product/2853
Hate to quote myself but work is in progress with one of these rings. Board layout is just about done and will piggyback the reactor dispay. It will be optically isolated and have it's own power.
anigif.gifYou're currently viewing posts by Pinsider twhtalm.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/total-nuclear-annihilation-core-cool-down-mod?tu=twhtalm and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Warner Robins, GA