(Topic ID: 195784)
Linked Games
Total Nuclear Annihilation
Spooky Pinball, 2017-
Total Nuclear Annihilation (CE)
Spooky Pinball, 2022
Topic Gallery
You're currently viewing posts by Pinsider refugenate.
Click here to go back to viewing the entire thread.
Tempe, AZ
Quoted from TigerLaw:Yea, I'm surprised they are not over 200 yet. My guess is they end up running about 350 of these by the end of the run.
Yup, I thought they would be way over 200 by now. That's also one reason I ordered now rather than wait any longer. Like you said, I think after this week the orders will significantly increase. Should be a great game to compliment our collections! So stoked man.
1 month later
Playing TNA for the first time last night and the auto plunge would fire the ball and it sometimes would rattle on the sides and come back down. The auto plunge would try again and the ball would rattle against the side and not make it past the gate. Could it be the metal ramp fork or screws getting in the way? Anyone else seen this?
Quoted from Rascal_H:Could be, but I would think the shooter tip alignment would be the more likely culprit. Like maybe it’s rattling the sides before it even gets to the ramp?
It seems that the ball hitting the sides starts once it gets past the metal fork part.
Quoted from SpookyCharlie:Try adjusting the launch power. Could be just hitting too hard.
Thanks Charlie, I’ll give that a try. This game is amazing by the way!
2 months later
I’m trying to update the code and I’m not sure what I am supposed to see? I inserted the usb with the .pkg file and the screen said “updating” and 5 seconds later it said “complete”, remove the usb and power cycle. I did and when it started to boot it kept resetting and now the screen is blank and the numeric displays are cycling left to right. It’s been doing this for 15 minutes. Is it updating correctly? How long should it take?
Quoted from trilogybeer:after the update and power cycle the game should start up normal , less than a minute .
So while the USB is plugged in, 10 minutes and then once it is removed and power cycled, less than a minute?
Quoted from trilogybeer:new code file should be 689 MB , make sure you have the whole file on your usb .
Cool thanks trilogybeer I got it working. But now I have the balls ejecting during attract mode. Everything was working fine before the update.....
Quoted from dri:My "trough 1 and jam" opto board transmitter connector was reversed. Easy fix.
Yup that was the culprit on mine as well. Thanks dri !!!
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider refugenate.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
