Can't wait to see this at the York show!!
Quoted from Fytr:
Folks with games in hand - does the PF have Scott's signature on it somewhere under the clear?
I had requested this multiple times and the recent interview with Scott on the Head 2 Head Pinball Podcast kind of made it sound like it might be there, but wasn't conclusive.
Send him a sac rack with a postage paid return envelope and he'll put some dna on it.
Just sent deposit. Looks like I'm #337. Unless someone in the low 100's wants to switch with me.
Feels like it's been at 110 for a month now.
Maybe the next 227 people will drop out and I'll be next in line.
Mine did the same. I peeled them off thinking it was some leftover crap from assembly or something.
Quoted from NeilMcRae:
Take the screws out the side rails just come off. Align the roll so that it sits nicely and fills the letters. Replace the side rails. Feed the cable in at the back near the backbox. Stick the power adaptor inside the cabinet away from the amplifier and other cables. Boom. job done.
Do the flipper buttons need to come off?
I just installed the lighted side rails but they aren't turning on. Have the power plugged into the correct spot.
What is this little button for?
Anyone add lighted flipper buttons? Could you let me know which ones and where you got them?
For those of you who did the lighted side rail mod, ehat did you do with the top screws on the rails? Will it damage the light to screw through it?
Quoted from FatPanda:
I believe there is a set time, where if you don't get the target, it'll move it for you. Very thoughtful by Scott!
BTW, the "D" target is a "D" target for sure!
The worst is planning perfectly, getting that multi ball going so you have a better chance of hitting that target, then watching your balls drain back down to one.
Maybe some thicker mylar or I was thinking about cutting circular felt pieces to go under the posts?
Quoted from Pinballocd:
452 Set up and Dialed In!
Mods done... Upgraded monitor, TNA and Ghost LED backlighting, ceramic ball, sticker kit, purple led on start button, led upgrade to beacon, LED OCD speaker rings.
This is what happens when you have to wait 6 months and read this post every day. I wonder if I will stop looking every day now, doubt it. .......
Had Spooky add shaker, side mirrors, knocker and coin box.
Also waxed playfield, had to turn on amp, turn up gain on sub, adjust lock bar. Love the sticker on the back box idea, had to do it!
Loving Life!! Thanks Spooky!!!!!
[quoted image][quoted image][quoted image]
Just need lighted flipper buttons.
Quoted from Damonator:
I didn’t find these when I searched PBL.
Pink or purple? Where did you buy them from?
Did anyone splurge for the rather expensive power accessory board from PBL or is everyone just using lots of splitters?
They are pinkish/purple. Match great. And yes, I also got the board from PBL. Didn't know if it was necessary or not.
I got the black ones from Home Depot. No issues. Don't even notice them when looking at the game.
Wish mine would do that. Maybe I'd get past reactor 5 for once.
Just went to fire up a game and the screen says no signal then goes dark. Playfield lights just stay solid white. No start button light.
Quoted from procks:
I guess what I'm really asking is how the hell do you get through 9 reactors? Sometimes I make a mistake and the ball drains but a lot of times it seems like there's nothing I could have done to prevent it. How do you ballers get so far without lady luck taking you out?
I'm happy when I make it to #3.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside