Quoted from gprotein:
Joining the club soon, and if anyone has the lighted side rail that's no longer needed please PM me...
To anyone not familiar with the lighted side rail mods…..
This was my first time working with this type of mod. Set up is relatively easy. You position the lighted strip flush with the top of the rails. When you look at the strips, you will notice that there is a small gap between the small upper lit portion and lower lighted portion. This is to allow the two upper screws to poke through the plastic without touching the lit (electrified) portion of the strip when securing the rails back on.
Sounds great IN THEORY.
However, my game quickly became Total Nuclear Electrocution. I was getting a shock when touching the right side rail, and the shock increased when touching the rail and lockdown bar together.
I ended up taking the rail off to check if the screws were touching either electrified strip. It did not appear that they were. The holed appeared to be between the center. My kit was from Hooked on Pinball. I sent in a request for help and received a response/fix in short order. Apparently, if one atom of the screw is touching anywhere near those electrified strips, you risk the shock hazard. The fix was to use something like a hole punch to make a wider hole, then cover the hole with electrical tape so that when the screw penetrates, it (for sure) is only touching electrical tape.
The fix worked.
Also installed lighted purple flipper buttons. Just waiting for flashinstinct’s stickers to arrive and then my game will be dope AF.