Quoted from TheNoTrashCougar:Yeah, that is about right for that coil. The next thing I would look at is to make sure your 48v supply is putting out 48v or more to the high powered coils. This can also be turned up on the supply itself without harming anything.
I know this sounds dumb, but also check and clean your flipper switches to make sure they are getting nice solid contact. I have seen a few flipper weakness issues because of this over the years. I never would have thought to check that at first, but probably not what is going on here.
Thanks,
--Scott
Thanks for the suggestion. Voltage on the coil looks good, 49.2v. I've been playing quite a bit in the last few days. The flippers have still been falling a little when hit hard, but I haven't had them fully collapse in a while. Is it expected for them to collapse about 1/3 of the way and then recover when hit from the scoop / hard rebound? Or should they always be pretty rigid?