Quoted from CraigC:

ah, well go to my setup if you want to be issue free . I've had it this way on 2 different ToMs.
-c

Quoted from CraigC:

what is your solution? we've seen the hose mod above, and my metal post.
-c

Quoted from pinballinreno:

Ball gets trapped to the left of the trunk:
This was an issue early on.
The correct fix as per the factory hand out was to remove the screw from the T-nut next to the bare post.
Then add a new hollow stainless post through the T-nut from the top with a long screw and washer.
Then apply a nut on the end of the new longer post screw under the PF.
You can then put a rubber on the new post as it should look similar the existing one under the ramp edge.
If you get a hollow post with a notch for a rubber it will absorb most of the shocks and not bend.
You have to use a metal post, as a screw with a rubber sleeve, will not last under repeated hits from the ball.
If I get a chance Ill upload a photo if needed or you can email me.

Quoted from german-pinball:

Update:
My wife and me are still very busy working.
The next 20 boards will be shipped on monday morning.
If somebody is very very urgent, please send me a PM.
See how my wife is placing the smd LEDs:
wife_placing_SMD-LEDs_(resized).JPG
I myself am very hard working too, hope, you all like my new string
Ingo_at_work_(resized).jpg