Quoted from german-pinball:

So guys, finally it will go into production now.
I have ordered today:
100 boards "single-Leon-board"
100 boards "new trunk-opto board with Leon integrated
100 boards "new single trunk-opto-board
I have calculated the prices and these are as follows:
BOARDS COMPLETE SOLDERED:
- single Leon-board --------------------------- 25,00 USD = 23,50 EUR
- Trunk opto-board with Leon integrated ------58,00 USD = 54,00 EUR
- single trunk-opto board ----------------------40,00 USD = 37,15 EUR
BOARDS AS DIY-sets:
- single Leon-board --------------------------- 20,00 USD = 18,60 EUR
- Trunk opto-board with Leon integrated ------50,00 USD = 46,50 EUR
- single trunk-opto board ----------------------35,00 USD = 32,60 EUR
+ 6,00 USD / 5,60 EUR shipping worldwide / inside EU.
Please do not forget to add the shipping costs!!!!!
I have ordered the boards as said before and all parts for at first 50 PCBs, as I do not know, how many of you still want to have a board.
As I had costs of about 1.500,00 USD up to now for the parts and the boards, it would be great, if everbody, who is still in this project, could pay in advance. Payment should be done via paypal.
The time window is a follows:
2-3 weeks, until the boards are here, 1 week soldering the boards, so that I could latest ship in about 4 weeks, but I think, it will be a bit earlier, namely in 3 weeks.
In the next 2 weeks, I will make a soldering guide / instructions for the DIYers between us and an installation guide for the Leon-board.
There is also available a little test-board for the trunk-opto-board (could be interesting for the DIYers). With this board, you can test the trunk-opto-board "offline" on the bench, you only need to connect the test-board to a +12VDC power-source and can test everything.
Price for this little test-board is 6,00 USD / 5,60 EUR.
The test board looks like this:
[quoted image]
The list of all, who have shown interest, is in post #83 (https://pinside.com/pinball/forum/topic/tom-trunk-error-leons-fix-anyone-done-this/page/2#post-2648292).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
So, please guys, check, if you are still interested and what board/boards you want. Send me a PM. Important: If you pay by paypal, please give the following informations:
- your pinside name
- what kind of board/boards you want
- your adress
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you have any questions, please to not hesitate, to ask me or post it here.
To avoid confusion for me, I will always update the list in post #83 and add a (*) behind the name, who paid, thats the simpliest way for me, because I only need to execute the list.
Cheers
Ingo
PS.:
Short hint: If you use the GLM trunk-opto-board, there is NO need, to take a new trunk-opto-board. The GLM board is a very good board, that was the only one, that solved all problems of the original board.

Quoted from german-pinball:

So guys, finally it will go into production now.
I have ordered today:
100 boards "single-Leon-board"
100 boards "new trunk-opto board with Leon integrated
100 boards "new single trunk-opto-board
I have calculated the prices and these are as follows:
BOARDS COMPLETE SOLDERED:
- single Leon-board --------------------------- 25,00 USD = 23,50 EUR
- Trunk opto-board with Leon integrated ------58,00 USD = 54,00 EUR
- single trunk-opto board ----------------------40,00 USD = 37,15 EUR
BOARDS AS DIY-sets:
- single Leon-board --------------------------- 20,00 USD = 18,60 EUR
- Trunk opto-board with Leon integrated ------50,00 USD = 46,50 EUR
- single trunk-opto board ----------------------35,00 USD = 32,60 EUR
+ 6,00 USD / 5,60 EUR shipping worldwide / inside EU.
Please do not forget to add the shipping costs!!!!!
I have ordered the boards as said before and all parts for at first 50 PCBs, as I do not know, how many of you still want to have a board.
As I had costs of about 1.500,00 USD up to now for the parts and the boards, it would be great, if everbody, who is still in this project, could pay in advance. Payment should be done via paypal.
The time window is a follows:
2-3 weeks, until the boards are here, 1 week soldering the boards, so that I could latest ship in about 4 weeks, but I think, it will be a bit earlier, namely in 3 weeks.
In the next 2 weeks, I will make a soldering guide / instructions for the DIYers between us and an installation guide for the Leon-board.
There is also available a little test-board for the trunk-opto-board (could be interesting for the DIYers). With this board, you can test the trunk-opto-board "offline" on the bench, you only need to connect the test-board to a +12VDC power-source and can test everything.
Price for this little test-board is 6,00 USD / 5,60 EUR.
The test board looks like this:
[quoted image]
The list of all, who have shown interest, is in post #83 (https://pinside.com/pinball/forum/topic/tom-trunk-error-leons-fix-anyone-done-this/page/2#post-2648292).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
So, please guys, check, if you are still interested and what board/boards you want. Send me a PM. Important: If you pay by paypal, please give the following informations:
- your pinside name
- what kind of board/boards you want
- your adress
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you have any questions, please to not hesitate, to ask me or post it here.
To avoid confusion for me, I will always update the list in post #83 and add a (*) behind the name, who paid, thats the simpliest way for me, because I only need to execute the list.
Cheers
Ingo
PS.:
Short hint: If you use the GLM trunk-opto-board, there is NO need, to take a new trunk-opto-board. The GLM board is a very good board, that was the only one, that solved all problems of the original board.

Quoted from pinballinreno:

This is the newer auto eddy board:
https://www.tanglestech.com/TPP-1023

Quoted from JustEverett:

Do you know if this works for both the trunk and the outlanes? I have a friend needing all three boards, but can't seem to catch them in stock from Pinbits. Also trying to get in touch with Ingo for an upgraded board, but with no luck like everyone else.

Quoted from pinballinreno:

Its supposed to be faster responding with a little bit better accuracy than the pinbits.
I have the pinbits sets, I havent tested the AU one yet.

Quoted from indypinhead:

I know this is a VERY old post.....
I purchased the "ultimate trunk error hardware fix kit" years ago, and I'm finally getting around to installing it.
Does anyone have a link to the installation instructions? I can't seem to find mine.

Quoted from jcar302:

I don't fully remember how I installed it, but you will have to depin a connector. That's the only part of any significance.

Quoted from indypinhead:

I know this is a VERY old post.....
I purchased the "ultimate trunk error hardware fix kit" years ago, and I'm finally getting around to installing it.
Does anyone have a link to the installation instructions? I can't seem to find mine.