Payment sent for combo board and tester,thanks so much for fixing this annoying problem.
You're currently viewing posts by Pinsider fiberdude120.
Click here to go back to viewing the entire thread.
I spoke with him sunday and he was mailing things out. I payed for my board a couple of weeks ago and he said it would take a couple of weeks before he shipped. So for me he is right on time.
Quoted from robotron:are you all replacing the opto interrupters when replacing board? are the originals black plastic and repolacements aluminum?
thanks to all!
The new ones are aluminum.
Quoted from nightsearcher:Dumb question, but because I bought the Leons Fix combo board, I shouldn’t have to change out the actual original eddy board with a new smart eddy board also- should I. I’m under the impression that this is a cure all for all trunk problems
No need to change the eddy board. As long as your eddy board worked before your trunk problems should be fixed.
Quoted from nightsearcher:Had to give the trunk eddy board a tap to get it it working , before I took it apart to change the board
If the eddy boards are hard to keep in adjustment it could be the pot on the boards are going bad. You can get the pots from digitech and replace them yourself for about $1.00,well worth the investment. Much better than spending $70 per board from some suppliers.
Quoted from nepinplayer:Trunk Eddy boards are back in stock at Pinbits if anyone here needs one. I've got one ordered as well as a Trunk board from Ingo. It will be nice not having to mess with the Trunk after every handful of plays.
Most of the time you can just solder a new pot on the board and that takes care of that problem. I did mine and they work great now, cost about $1.68 per board.
You're currently viewing posts by Pinsider fiberdude120.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tom-trunk-error-leons-fix-anyone-done-this?tu=fiberdude120 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.