You're currently viewing posts by Pinsider LTG.
Click here to go back to viewing the entire thread.
Check the ball trough. Divots in the bottom where the balls roll ? Balls magnetized.
Then go into Tests - Switch Edge, and try all the switches on the playfield you see and the ball trough optos, roll the balls in one at a time. See if you hurt the switch matrix on the cpu. If you put LEDs in with the power on.
LTG : )
Quoted from rogerdodger:How do I test the switch matrix on the CPU?
go into Tests - Switch Edge, and try all the switches on the playfield you see and the ball trough optos, roll the balls in one at a time.
Quoted from rogerdodger:One of the lock switches is not registering.
Need adjusting ? Broken wires there or at other switches using the same wire colors ?
LTG : )
You're currently viewing posts by Pinsider LTG.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tom-multiball-issue-1?tu=LTG and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hopkins, MN