Theatre of Magic
Bally, 1995I’m working on a Theater of Magic and one of the multitude of issues it had, is the eddy switches on the outlines are not registering. So I replaced the boards with standard replacements. Not the auto sensing ones, the client would not spend the extra. They still don’t register the ball passing over, so I did some testing and the sensor will only read the ball if it is physically touching it, if it is at full sensitivity.
Both of them are doing the same thing. What am I missing here?
Thanks.
If you look in the manual the eddy sensors for the trunk and outlanes are just different by one capacitor. Its possible the eddy sensors you have are compatible for the trunk.
Just curious where you bought them?
Hmmm, I was not aware of that. So you may be correct. I will have to check when I get to my shop tomorrow afternoon.
This is the one I bought.
https://www.pinballlife.com/williamsbally-eddy-sensor-board-assembly.html
Ok, went ahead and did some digging and yep, I ordered the wrong blasted ones.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tom-magnet-eddys-too-weak-after-new-eddy-boards and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Maryville, TN