I was hoping someone could post a picture of the wiring for center targets under the playfield. (The ones on either side of the left ramp) I've got issues with mine. It has previously been repaired, so I'd like to make sure it's correct.... I suspect it is not.
Thanks in advance!
One side has a green wire and white wire and a diode. The other side has two jumpers from the side with the diode.
Get the side with the diode working first. Compare to every other stand up target in your game. White wire and black end of diode there, green wire there, silver band end of the diode there.
Check out your slingshots, same thing. One leaf blade switch has a diode, the other one jumpers to it. Wire your ramp targets the same as them.
LTG : )
Quoted from robbiedoo:Will that matter?
I'd remove the diode and wire like the slingshot switches.
In game play, the ramp stand up targets both do the same thing, no matter which you hit, the same as a slingshot set of switches.
I don't think it matters, I'd just do it as when it was first built.
LTG : )
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tom-center-target-wiring and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Edmonton, AB
Hopkins, MN