Quoted from Crile1:Website says you have to be there to bid.
Bummer, wish I was in GA. Looks like some real nice pins!
I've been to that auction before. High prices High fees, lots of buybacks.
But that G&R looks really tempting....
Looks like agreat variety this time too.
Hmm, that banzai run looks a bit rough, but very curious what it will go for. As borderline sacrilegious as it sounds, I've always wanted to find a beat one to try to retheme.
Quoted from AUKraut:A Star Trek LE with ColorDMD???? At an auction?... Wow....
agreed!!! what did it go for?
I went to this today, but alas I had to leave before the pinballs went to auction. Their was an Eros Cocktail machine that went for pretty cheap early on.
While this topic is active if there's anyone from western Nc or anyone off of 1-40 who travels through asheville on their way home from this show regularly I could use rental space for one machine in your truck next time. I will pay your gas for your entire trip if I win a machine and I live two miles off 1-40 in asheville so would be a good dinner break on way home. I wanted that funhouse but I'm sure it went too high. Seriously though if you bring a big truck to the show and want to rent some space to me let me know before the next show.
Quoted from luckycreature:I went to this today, but alas I had to leave before the pinballs went to auction. Their was an Eros Cocktail machine that went for pretty cheap early on.
While this topic is active if there's anyone from western Nc or anyone off of 1-40 who travels through asheville on their way home from this show regularly I could use rental space for one machine in your truck next time. I will pay your gas for your entire trip if I win a machine and I live two miles off 1-40 in asheville so would be a good dinner break on way home. I wanted that funhouse but I'm sure it went too high. Seriously though if you bring a big truck to the show and want to rent some space to me let me know before the next show.
Asheville....what? We are neighbors to some degree. I'll also participate in your request, if there are any takers. Buddy doughslingers is close (VA), and suspect there is opportunity here......mark
Quoted from luckycreature:mk6pin yep. I've been a pinball fan for over twenty years but one of these shows I'll buy my first machine. I just don't have the car with space to bring it home lol.
That's awesome!!! PM me sometime, and maybe I can help get one in your house....
Quoted from luckycreature:That Star Trek machine was nice today.
Drooling now....@doughslinger, were you there?
Hammer prices...
Comet 850
RFM 3100
FH 3200
6MDM 600
Nascar 1800, 1800, 1900
Freddy 2000
SlugFest 1100
Congo 3500
DE Playboy 1100
HS 1200, 1300
Monop 2600
Stern PB 1600
HD 3rd 3800
Alvin G WT 2000
Stern Rolling Stones 5200
XMen wolv 5500
ST LE 5800
Elvis 3300
Comet-no boot 500
Shaq- no disp 1050
Ghost Busters 4600
PBR Can Crusher 3700
Stargate 1700
Sorcerer 1400
Xenon 1300
BK 2000
Avatar 4500
Lost World 1100
GNR 5200
Avengers-hulk 4700
CBWizard 1200
X files 2200
MondayNight FB 1300
Road Kings 800
EM 50/50 - parts 25
Dr Dude 1500
Big Guns 1300
R911 1100
Space Station-parts 350
Banzi Run 1600
Thats it...
Bob
Quoted from Big_Bob:For some, others only a small additional fee
Thoght it was 20 percent and also taxed?
Quoted from Big_Bob:Hammer prices...
Comet 850
RFM 3100
FH 3200
6MDM 600
Nascar 1800, 1800, 1900
Freddy 2000
SlugFest 1100
Congo 3500
DE Playboy 1100
HS 1200, 1300
Monop 2600
Stern PB 1600
HD 3rd 3800
Alvin G WT 2000
Stern Rolling Stones 5200
XMen wolv 5500
ST LE 5800
Elvis 3300
Comet-no boot 500
Shaq- no disp 1050
Ghost Busters 4600
PBR Can Crusher 3700
Stargate 1700
Sorcerer 1400
Xenon 1300
BK 2000
Avatar 4500
Lost World 1100
GNR 5200
Avengers-hulk 4700
CBWizard 1200
X files 2200
MondayNight FB 1300
Road Kings 800
EM 50/50 - parts 25
Dr Dude 1500
Big Guns 1300
R911 1100
Space Station-parts 350
Banzi Run 1600
Thats it...
Bob
Stargate and dude appear to be the only decent prices in the bunch.
STLE @ 5800. seemed very in line....I would have grabbed it, cash on the spot.....
(w/ color DMD....gives me a nice bar as I pursue one...)
Quoted from MK6PIN:STLE @ 5800. seemed very in line....I would have grabbed it, cash on the spot.....
(w/ color DMD....gives me a nice bar as I pursue one...)
Think its closer to 7300 out the door after fees
Quoted from bigd1979:Think its closer to 7300 out the door after fees
that's insane that "fees" end up being almost 2k.
Quoted from delt31:that's insane that "fees" end up being almost 2k.
Agree w that....so finding one in the wild for $5800.00 is not realistic? I can now see the lucrative nature of the secondhand markup.
That's not an auction....rather controlled extortion, if the rates are that dramatic. Someone had to be willing to take $5800.00 for that machine.
Quoted from wolfy:Fees are 10% up to $100 plus tax of about 10% in TN. Total fees on the STLE $100 + $580 = $680
$6480 then? A good deal for someone, I believe (based on condition, of course). Seems more in line..congrats to whoever got it...
Quoted from MK6PIN:$6480 then? A good deal for someone, I believe (based on condition, of course). Seems more in line..congrats to whoever got it...
That is about $1,000 off the current rate. Great deal.
Quoted from MK6PIN:$6480 then? A good deal for someone, I believe (based on condition, of course). Seems more in line..congrats to whoever got it...
That is a good price. A few ok prices in the list. Better then most auctions I see
Jj
Quoted from kermit24:That is about $1,000 off the current rate. Great deal.
Quoted from Gexchange:That is a good price. A few ok prices in the list. Better then most auctions I see
Jj
guess I need to pay attention to these more....seems everytime I looked in the past, everything was routed heavy, or expensive. Guess with all the new pins coming out, there are good deals for even high end models, if your lucky or patient (neither of which I'm good at)....
I thought it was usually around 20 percent more than the hamner price...at least thats what ive been told.
Quoted from MK6PIN:$6480 then? A good deal for someone, I believe (based on condition, of course). Seems more in line..congrats to whoever got it...
I would bet this was a buy back. If not, killer deal.
Quoted from bigd1979:I thought it was usually around 20 percent more than the hamner price...at least thats what ive been told.
See Wolfy post above. When they were in md and PA, it was 10% if cash, 13% credit, plus tax. Great deals on vids.
IMO, it was the best overall condition of machines I have seen. Been doing this for 10+ years and I think 90% of this lineup worked and was not blown out. Obviously a few rough ones but great auction to attend to meet/greet and play some games even if you do not buy.
Quoted from Big_Bob:IMO, it was the best overall condition of machines I have seen. Been doing this for 10+ years and I think 90% of this lineup worked and was not blown out. Obviously a few rough ones but great auction to attend to meet/greet and play some games even if you do not buy.
Yeah. It was worth my drive just to play Star Trek, Xmen and funhouse on free play. I always got off after one game in case anyone else wanted to try but still was able to get in multiple games
Fees are only capped for operators not the gen public.
Someone off the street will pay about 18% over than hammer price or more if you use a cc.
It can be a good deal if you have an ops license and a sales tax exemption cert.
I think a buyback only costs 10$ so those high priced newer machines aren’t really selling.
That was the best lineup I’ve seen up there.
What time did the pins start? They usually do them last and start about 2 ish.
Bob did u buy anything?
Quoted from Pinphila:See Wolfy post above. When they were in md and PA, it was 10% if cash, 13% credit, plus tax. Great deals on vids.
Good to know ...thanks
As far as I know there were no BuyBacks. Of course you never know but you can usually tell. I only purchased the space station for parts along with some arcade stuff. The Congo was pretty nice if I recall someone else might chime in with more info.
Quoted from Big_Bob:As far as I know there were no BuyBacks. Of course you never know but you can usually tell. I only purchased the space station for parts along with some arcade stuff. The Congo was pretty nice if I recall someone else might chime in with more info.
Then congrats to whoever got the STLE!!!!!! Sounds like it was a great auction....
Quoted from bigd1979:I thought it was usually around 20 percent more than the hamner price...at least thats what ive been told.
It is around 18-20%
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tn-auction-feb-17?hl=biffbar and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.