(Topic ID: 277807)
Linked Games
Ghostbusters (LE)
Stern, 2016-
Ghostbusters (Premium)
Stern, 2016
-
Ghostbusters (Pro)
Stern, 2016
-
Rick and Morty (Blood Sucker Edition)
Spooky Pinball, 2020
-
Rick and Morty (Standard)
Spooky Pinball, 2020
-
Simpsons, The
Data East, 1990
-
Teenage Mutant Ninja Turtles
Data East, 1991
-
Teenage Mutant Ninja Turtles (LE)
Stern, 2020
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Davenport, FL
3 weeks later
I'm not sure. Been waiting a long time for a PM to get the order officially in. I'll gladly wait. Just hope they keep making them.
1 week later
For future reference
Prop machine up to remove the two leg bolts and attach the quick release bracket provided.
Remove lockdown bar and slide out the glass carfully. Lift and slide out to gain access to vent holes on bottom of cab.
Cable should be routed on the bottom side of cabinet to the back vent hole.
Secure cable along bottom side with provided sticky backs and zip ties provided. After zip ties tightened excess zip ties should be twisted off or can be cut close to head of tie with flush cutters.
Once cable is routed into cab for best resluts attach alligator clips according to picture provided based on if yours is left side or right side mount.
NOTE: Keep in mind when doing maintence and need to slide playfield completly out remember to dissconnect the alligator clips before doing so.
20200928_185403 (resized).jpg20210124_144943 (resized).jpg20210124_150734 (resized).jpg
Quoted from guitarded:Looking forwrd to getting my PM to order a Vat of Acid for Rick and Morty.
vat of acids just left today to be painted
NOTE: Keep in mind when doing maintence and need to slide playfield completly out remember to dissconnect the alligator clips before doing so.
This is why I went thru the speaker grill 
Has anyone had an issue with the LEDs not lighting up?
I checked to see if it was the power cords by plugging into a power cord powering another mod and that didn’t work either.
Let me know if anyone has any troubleshooting ideas. Thanks!
3 weeks later
Dollard-des Ormeaux, QC
Super exclusive ad from the Pinside Marketplace!
update cups are still being made. second run is currently going smooth again. parts have been arriving and holders back from paint. notes have been taking on those interested.
Dang I saw these a while back and then tried looking again and couldn’t find them and just stumbled on them one more time. I’d love to get a green nuclear one for TNA and a green vat of acid one for Rick and Morty if that is possible or if you could put me on whatever list that is available.
1 week later
Vat of acids are shipping out. May be up to a couple weeks til run 2 of nuclear lit cup holder's are ready to start shipping out. thanks for everyone's patience.
vat of acid cup holders.
Turn machine off to avoid shock hazards .Prop machine up and remove two leg bolts on the side you want the cupholder to go on. Attach provided bracket re using leg bolts from game. Set machine back down once bracket is installed. Vat of acid can now be attached to bracket. Route provided cables into cabinet and secure using provided sticky backs and zip ties.Twist off excess zip tie remaining after being secured. Route cable to coin door. Remove bulb behind either coin slot and insert provided matrix bulb connector. Connect cable to matrix connector. Your machine can now be turned back on.
Alligator clips are provided if you choose to acquire power from a different location.
20201226_212409 (resized).jpg20210308_142712 (resized).jpg20210308_142734 (resized).jpgQuoted from garretswinning:vat of acid cup holders.
Turn machine off to avoid shock hazards .Prop machine up and remove two leg bolts on the side you want the cupholder to go on. Attach provided bracket re using leg bolts from game. Set machine back down once bracket is installed. Vat of acid can now be attached to bracket. Route provided cables into cabinet and secure using provided sticky backs and zip ties.Twist off excess zip tie remaining after being secured. Route cable to coin door. Remove bulb behind either coin slot and insert provided matrix bulb connector. Connect cable to matrix connector. Your machine can now be turned back on.
Alligator clips are provided if you choose to acquire power from a different location.
[quoted image][quoted image][quoted image]
Interested in vat of acid cup holder. Cost?
Great job on the paint effects. Really dig mine, garretswinning !
48A2D3CB-5CF5-48F0-A779-7B9D2F8A4F80 (resized).jpeg 1 week later
1 month later
Quoted from Jimmyhonda:I gave up months ago. I ordered two 7 months ago. Never heard back.
I ordered six cups early on. It took awhile, but they were finally delivered and worth the wait.
OP’s last sign on was 15 April. Maybe something is going on.
I apologize for the wait taking longer then expected. Unfortunately im still waiting on getting last parts back from my painter that was dropped off 61 days ago which is not ideal by no means. Thanks for the kind words on the cup holders to those who have received them. Soon as these last parts are received there will be an update followed by immediately shipping them out. Thanks again for everyones paitience as im doing the best i can to make a quality product as perfect as i can.
Quoted from garretswinning:I apologize for the wait taking longer then expected. Unfortunately im still waiting on getting last parts back from my painter that was dropped off 61 days ago which is not ideal by no means. Thanks for the kind words on the cup holders to those who have received them. Soon as these last parts are received there will be an update followed by immediately shipping them out. Thanks again for everyones paitience as im doing the best i can to make a quality product as perfect as i can.
Thank you for the update!!!
Received parts from paint today. Assembly will continue again and will be going through the list of those interested. There were some colors that were tested and was very pleased with the results. Pics do not do these justice but here are a few quick pics of orange, purple, and red. Not many were made in different colors but if interested a few will be avaliable.
20210511_152506 (resized).jpg20210511_152542 (resized).jpg20210511_152646 (resized).jpgPromoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
